Microprocessor Temperature Controller

Origin:Asean Vietnam

Product detail: 

MP-888	Microprocessor Temperature Controller
Features
Self-optimizing feature allows a very high regulating accuracy even at high temperatures Adheres to the set temperature independently of the consumer Can be adjusted to indicated °C or °F The analogue interfaces 0 - 5 V, 0 - 10 V and 4 - 20mA are standard included in the controller
Operating Elements
Term		Function
Set Value Indication		Set temperature, required temperature
Actual Value Indication		Actual temperature, measured, effective temperature
Flow Rate Indication		Display in litres/min (British) or gallons/min (American)
Temperature Adjustment		Raise / Reduce of set value
Programming		Press 3 seconds (Program Steps 1 - 67)
Flow Control
Monitoring (LED Green)		Flow control active
Alarm (LED Red)		Alarm flow control
Cooling ON		Lights up when the cooling relay is activated
Heating ON		Lights up when the heating relay is activated
Sensor Failure		Lights up when the sensor is not connected correctly or the wrong type of sensor is used
Temperature Deviation Control		Lights up when the difference between set and actual temperature is too high. Factory set ± 5°C (± 9°C)
Maximum Temperature		Lights up, when the maximum temperature has been reached. (Model Dependant)
External Temperature Control		Lights up when the set point is adjusted from external by putting on current / voltage.