Click for original picture
Brand:aa
Product detail:
CANBUS Original Car Alarm
Keep the same function as the original car alarm
Easier installation without cutting any wire
For Elantra,Hyundaioriginal car
This is a new upgrade car alarm system with the original fittings, compatible with the original car's CANBUS data, can be finished the installation in 5 mins. because it get the original car's socket, keep all function as original car's alarm features, can be used the remote controller of the original car.
| Item No. | Car type | Year | Need to connect the wire |
| CF-CWH01 | Elantra | Need to connect 3 wires |
Advantage:
CANBUS UPGRADE ALARM | VS | AFTERMARKET CAR ALARM |
Compatible with the original car remotes |
| Use the aftermarket car alarm remote controller |
With the original car's CAN data, can be controlled |
| Controlled by the relays electric output, short working life, |
Alarm detecting for 4 doors, 4 door actuators,car |
| Alarm detecting for 4 doors only, couldn't work with car |
Speed over 20km/h, car door is locked automatically |
| Foot brake control door locking |
Car door unlock automatically while meet the accident, |
| No |
Upgrade car alarm Installation Advantage:
-No need to cut any wire, just plug the above sockets are ok!
Function:
1 | Compatible with the original car's CANBUS communication data, control the alarm features originally. |
2 | Car door,trunk,bonnet trigger alarming with the signal light flash and the siren beep. |
3 | Remote arm and disarm with light and siren sound confirmation. |
4 | Auto arming and auto lock. |
5 | Mute |
6 | Not well closed warning for the car door,trunk,bonnet. |
7 | ACC off, the car doors will be unlocked. |
8 | Signal light flash in case the car door is opened. |
9 | LED indication lamp status. (should to equip with the LED lamp) |
10 | Vibration sensor alarming. |
11 | Engine disable(Optional), immobiliser, oil cutter(Optional),need to connect fuel pump wire and extra charge. |
12 | Valet mode(Optional) |
13 | Remote to close and open the windows |
