medical liquid silicone for insoles

Brand:aa

Product detail:

 

                                                              Medical Liquid Silicone For Insoles

 

Application of medical liquid silicone for insoles

 

 

Used as inlay sealing materials for construction industry  

 

Has excellent demoulding performance, especially good for making precision instruments and impression materials. technique indexes:  

 

 As the main component of RTV silicone rubber,foam suppressor and silicone products.

 

 1,Can be used as inlay sealing material of electronic components for insulation, moisture resistance, shock resistance and heat resistance.

 

2,can be used as the material of rubber roller in car and machinery industries.  

 

3, can be used as the material of rubber roller in textile, plastic and print industry.

 

package, store and convey: Silicone rubber 107 should be stored in cool and dry place, avoid from acid , alkali and fire, prevent from sunshine. The storage time is a year, when it is over 1 year, it is available if tested with good quality.   

 

 

 

Technique Data of medical liquid silicone for insoles

 

 

 

Model	HY-E620#
Appearance	Translucent
Mixing Ratio	1:1
Operating time (Mins 25°C)	10-15
Curing time (Mins 25°C)	30-50
Hardness (A°)	18-20
Density ( g/cm 3 )	1.0
Viscosity (CS)	7000±3000
Tensile-strength( kgf /cm2 )	>13
Tear-strength (kgf /cm2 )	> 3
Elongation-break(%)	>450
Retractility(%)	≤0.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPERRATING INSTRUCTION of medical liquid silicone for insoles

 

 

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

 

 

 

2. Enclose the product (the original model) with four plastic plates or wooden plates.

 

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

 

 

 

4. Pour the mixture with correct mixing ratio into the model frame.

 

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

 

 

 

  

 

 

 

  

 

 

 

 

 

 

 

For more information , pls feel free to contact

 

Ms Mary

 

Office No. :0086-755-89948019

 

Mob:86-18938867578

 

Skype: mary901116

 

Email :hyxh(at)szrl(dot)net

 

Welcome to our website www dot szrl dot net