RTV 2 silicone rubber for mould making

Brand:aa

Product detail:

 

Applications of  RTV 2 silicone rubber for mould making

We specialize in manufacture of RTV 2 silicone rubber,Mold making liquid silicone,liqud silicone rubber,liquid rtv silicone,rtv 2 silicone rubber materials, to produce products in the following fields:

• Concretegarden furniture and fountains,
• Fibreglass resin decorative mouldings
• Polyurethane Resin castings
• Lead and Pewter products
• Wax candles
• Glycerinesoap items
• Jewellery lost wax master moulds
• Sculptor’s original mouldsfor foundry wax casting
• Replicating works of art
• Plaster moulding
• Sugar craft and chocolate casting
• Rigid foam furniture piece
• Ceramic and fibrepot planters
• Composite architectural panels
• Hobby cast articles
• Palaeontology and fossil reproduction
• Taxidermy and plastination
• Special effects for film, TV, and theatre

 

RTV 2 silicone rubber for mould making features

RTV 2 silicone rubber for mould making is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength ,tear strength and elongation.

 

 

 

Description of RTV 2 silicone rubber for mould making:
silicone rubber for resin craft mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.

 

RTV 2 silicone rubber for mould making data sheet:

Model	Color	Mixing ratio (%)	Pot life (mins)	Demould time ( hrs)	Hardness ( A0 )	Tensile-strength (kgf/cm2)	Tear-strength (kgf/cm)	Viscosity (cps)	Shrinkage rate (%)	Elongation (%)
638#	white	100 : 3	30	5-10	38	≥ 38	≥ 28	34000-36000	≤0.3%	380%
630#	white	100 : 3	30	5-10	30	≥ 47	≥ 35	28000	≤0.3%	430%

 

 

RTV 2 silicone rubber for mould making advantages:

* Reusable
* Molds can be used over and over again.
* Does not shrink
* Has good abrasion resistance.
* Comes in a wide range of hardnesses and therefore gives long mold life.
* Can be poured, brushed or sprayed on to the original model.
* Is the most economical overall (compared to other mold rubbers).

 

     

 

SHELF LIFE AND STORAGE

12 month.

Store in original, tightly covered containers in clean, dry areas. Storage information may be indicated on the product container labeling.

Material removed from containers may be contaminated during use. Do not return product to the original container.

 

PACKING    

25Kg/Pail, 200Kg/Pail.

 

Frequently asked questions of RTV 2 silicone rubber for mould making

Why does the silicone rubber mold have few molding times?

The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products. 

 

 

Further information, please feel free to contact Firleanna:

 

SKYPE:HY-Firleanna

 

T: 86-755-89212382

 

M:86-18938867520

 

F: 86-755-89948030

 

3w(dot)szrl(dot)net

 

3w(dot)sellsilicon(dot)com