Addition molding Silicone soft silicone

Brand:aa

Product detail:

Addition molding Silicone soft silicone

 

 

Applications  :

 

HY- E625# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing,shoe insoles making, seal for electronic components and solar circuit board, trademark decoration. etc.

 

Description  :

 

HY-E625# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making molds application.

 

Technique Data:

Model	E625#
Appearance	Translucent
Mixing Ratio	1:1
Operating time (Mins 25°C)	30 - 50
Curing time (Mins 25°C)	120 - 240
Curing time (Mins 60°C)	20 - 30
Hardness (A°)	25±2
Density ( g/cm 3 )	1.08
Viscosity (CS) (Part A)	30000 ± 5000
Viscosity (CS) (Part B)	5000 ± 500
Viscosity (CS) (After mixed)	10000 ± 2000
Tensile-strength( kgf /cm2 )	50± 5
Tear-strength (kgf /cm2 )	15 ± 2
Elongation-break(%)	500 ± 50
Retractility(%)	≤0.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

OPERRATING INSTRUCTION :

1. Clean your products and brush a layer of release agent (detergent or soap water) on the surface of your product.

Note: The model should not have been used to make molds for tin cured silicone rubber before. Otherwise, the addition silicone will not get cured. (Use a new model to test it)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Mixing part A and part B with 1:1 mixing ratio and stir evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

 

4. Pour the mixture into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

 

SHELF LIFE :

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

 

PACKAGE  :

Packed in clean 20kg/pail,  200kg/pail. 

 

 

Further information, please feel free to contact Firleanna:

SKYPE:HY-Firleanna

T: 86-755-85224692

M:86-18938867520

F: 86-755-89948030

3w(dot)szrl(dot)net

3w(dot)sellsilicon(dot)com