Click for original picture
Legal status confirmed
Brand:aa
Product detail:
hydraulic adjustable elbow machine
The following table is the detailed description of the elblow making machine,we also can design the machine according with customer requirements.
25—127mm hydraulic pushing elbow machine
(main technical parameters and scope of supply)
1 oil cylinder: Inner diameter 125mm, Stem diameter:90mm, the trip: 3m, pressure: 21Mpa, 2 bars
maximum thrust of the 2 cylinder:50tons ;
the forward speed: 0—140cm/min ,the fastest back speed: 450cm/min.
2 pump station:25scy-plunger pump :1 set
5.5KW Motor:1set(the main working pump)
CB - 20 gear pump: 1 set, 3Kw-motor 1set
The pipe size elbow size and wall thickness
Pipe size and wall thickness | Elbow size and wall thickness |
21.3mm×2.5/2.8mm | 27mm×2mm |
26.8×2.5mm | 34mm×2mm |
32mm×2.5mm | 42mm×2mm |
48mm×2.5mm/2.8mm/3mm | 60mm×2mm-2.5mm |
57mm×2.5mm/3mm | 73mm×2.5mm |
60mm×3mm/3.5mm | 73mm×2.8mm |
76mm×3mm/3.2mm/3.5mm | 108mm×2.8mm |
89mm×2.5mm/3mm/3.5mm | 114mm×2.8mm |
1″-6″SCH40 hydraulic pushing elbow machine
size | 1″-6″SCH40 |
effective distance of cylinder | 3m |
diameter of cylinder | 140mm |
The max trust of the two cylinder | 65tons |
heating method | mediun-frequency high-frequency |
pushing speed | 0-170cm/min |
the fastest back speed | 400cm/min |
pump station | 63Scy-plunger pump CB - 40 gear pump |
M-frequency power | power 250Kw |
size | 8″-16″SCH40 |
effective distance of cylinder | 4m |
diameter of cylinder | 250mm |
The max trust of the two cylinder | 210tons |
heating method | mediun-frequency high-frequency |
pushing speed | 0-100cm/min |
the fastest back speed | 450cm/min |
pump station | 63Scy-plunger pump 25Scy-plunger pump CB - 50 gear pump CB - 20 gear pump |
M-frequency power | 400Kw |
size | 18″-50″SCH40 |
effective distance of cylinder | 5m |
diameter of cylinder | 360mm |
The max trust of the two cylinder | 850tons |
heating method | mediun-frequency high-frequency |
pushing speed | 0-60cm/min |
the fastest back speed | 270cm/min |
pump station | 63Scy-plunger pump CB - 80 gear pump CB - 20 gear pump |
M-frequency power | 1000Kw |
The price list for some of the models
of the elbow induction heat forming machine we make
Modle | Working scope | Cost About (USD) | Remarks | |
Max. O.D. | Max wall thickness | |||
YWT-108 | 108mm 4inch | 7-12mm | 14000-22000 USD | This machine can carbon, alloy steel elbow of seamless, straight seam steel pipe and tube. By heating the pipe with induction heating coil and pushing it through elbow mandrel.
The price is different very much according to the Max OD.,the Max wall thickness of the elbow to get. |
YWT-133 | 133mm 5inch | 7-12mm | 15000 -24000USD | |
YWT-159 | 159mm 6inch | 8-14mm | 20000 -28000USD | |
YWT-168 | 168mm 7inch | 8-14mm | 22000-30000 USD | |
YWT-219 | 219mm 8inch | 8-20mm | 24000 -32000USD | |
YWT-273 | 273mm 10inch | 8-20mm | 26000 -38000USD | |
YWT-325 | 325mm 12inch | 8-25mm | 30000 -45000USD | |
YWT-426 | 426mm 16inch | 8-25mm | 35000 -55000USD | |
YWT-530 | 530mm 20inch | 10-3mm | 40000 -60000USD | |
YWT-630 | 630mm 24inch | 10-30mm | 45000 -70000USD | |
YWT-820 | 820mm 32inch | 10-40mm | 50000 -100000USD | |
YWT-920 | 920mm 36inch | 10-40mm | 60000 -150000USD | |
YWT-1220 | 1220mm 48inch | 10-40mm | 70000 -180000USD | |
YWT-1420 | 1420mm 56inch | 10-50mm | 80000 -200000USD | |
(On the above table, The bottum prices are for the elbow machine with low working ability, Eg,:YWT-108 cost 14000 USD the max thick of the elbow canbe get is 7mm)
Yanshancounty Fengliyuan Pipe Fittings Equipment Manufacture Co.,Ltd (CN)
E-Mail: flygjsb AT126.com Skype:shonepole Mobile:0086-13283260069 Mr Shing
