Click for original picture
Product detail:
There’s only one projector with the brightest, highest resolution HD image – the Christie Roadie HD+30K DLP® digital projector. Rounding out Christie’s expansive HD product line up, there’s no comparison for resolution, brightness or performance.
Producing 30,000 ANSI lumens, the Christie Roadie HD+30K digital projector utilizes Christie’s unique, flexible split-body design and features a new scooped hood, improved rear air exhaust and stackability while the revamped lens mount increases its rock solid performance.
With native 2048 x 1080 HD resolution and 10-bit image processing, images are simply stunning in their size, brilliance and quality. This tough, user-friendly projector is built for true road worthiness – frequent transport and quick set-up. With built-in body handles for handling and rigging or an optional stacking/ rigging frame, there’s nowhere the Roadie can’t go.
Features:
-3-chip DLP HD+ (2048 x 1080) delivering superior native HD+ image quality with excellent color rendition
-30,000 ANSI lumens - highest lumens offered in a native HD product
-1600-2800:1 contrast ratio enabling highly enhanced image detail, with blacker blacks and whiter whites
-Riggable and flyable - using the optional rigging frame, or the new standard handles, the Christie Roadie HD+30K is easily rigged and flown for large venue events
Uses:
-Renters/Stagers
-Houses of Worship
-Large Venue
-Tradeshows and exhibitions
-Auditoriums
-Concerts
-Casino, theme parks, museums
Specifications:
Display Technology and Resolution:
-3-chip 1.25" DLP
-2048 x 1080
Brightness:
-30,000 ANSI lumens (± 10%)
-90% brightness uniformity across the screen
Input Line Voltage:
-Ballast: 3-phase 200-230 VAC ± 10% @ 50/60 Hz (max 24A per phase)
-3-phase 380–415 VAC ± 10% @ 50/60 Hz (max 12.5A per phase)
-Projection Head: Single-phase 200 VAC to 240 VAC ± 10% @ 50/60 Hz
Lamp:
-2 kW, 3 kW, 4.5 kW 6.0 kW Xenon Bubble lamp
-750 hours (typical) lifetime
-User replaceable bulb
-Low cost of ownership
Power Supply:
-Separate 7kW low-ripple switch mode lamp ballast
Inputs, Control & Networking:
-RGBHV/YPbPr: 5 BNC
-DVI-I: analog/digital RGB/YPbPr (HDCP)
-Two option slots for analog/digital modules
-One composite video, one S-Video
-3 RS-232 ports and 1 RS-422 ports
-IR remote, built-in backlit keypad/status display
Lens Mount:
-Tool-free lens insertion system
-Tilt adjustment
Weight:
-310 lbs (140 kg)
-Shipping weight: 410 lbs (186 kg)
Standard Accessories:
-IR keypad w/batteries
-Line cord
-Handles for carrying and rigging
-Dual SD/HD-SDI module
-User manual
Optional Accesories:
-1.26X Anamorphic Lens
-Anamorphic Lens Mount
-Remote IR sensor
-Christie Image Warping and Edge-Blending module
-Input modules – DVI and legacy interface modules
-Ethernet, RS-232, RS-422 cables
-Service manual
-KoRE 10-bit librarian
-Rigging/stacking frame
-Rigging clamps
-High contrast apertures kit
-6', 25', 50' and 100' ballast cable kits
Dimensions:
-Projection Head size (approx): (W x L x H) 31.5 x 50.5 x 22" (800 x 1283 x 559 mm)
-Ballast (approx): 21.3 x 17.3 x 20.9" (540 x 440 x 530 mm)
-Optional rigging frame (approx): 33.5 x 54.9 x 25.7” (851 x 1395 x 653 mm)
-All measurements exclude lens, feet and stacking points but include the span of the standard handles
Regulatory Approvals:
-UL/CSA/IEC 60950 (3rd edition)
-FCC Class A, CE, CCC (pending)
-This product conforms to all relevant European directives, standards, safety, health and environmental concerns
Warranty:
-3 years parts and labor (including light engine)
