handsheet former

Brand:Xianyang taisite

Origin:China Shanxi

Model:PL6-E

MOQ:1Sets

Supply Time:Week

Product detail: PL6-E handsheet former.

In the laboratory, plants, minerals, and other fibers after cooking, beating, screening pulp, the pulp standards ease, then add copy sheet barrel, after stirring rapid pumping consider forming, and then press the vacuum in the machine and dried to form a circular 200mm diameter sheet, the sheet can be used as a further physical testing of paper samples.

  Technical specifications of the equipment in line with QB / T3703-1999 (prepared pulp laboratory sheets + conventional sheet former method), ISO 5269/2 & ISO 5269/3, 5269/2, NBR 14380/99, TAPPI T- 205, DIN 54358, ZM V / claim 8/76.

 PL6-E-type handsheet former  is copied from the PL6-C type (click here) pattern Beater's all wet, the Taiwan cabinet, forming tube, drier all into 304 stainless steel,It Increase the vacuum flask automatic drainage and the automatic charging function,

 This machine is a set of vacuum suction filtration molding, pressing, vacuum drying in one of the all-electric-controlled molding equipment for a variety of ultra-fine fibers, nanofibers, super thick paper on page suction filtration and dried under vacuum molding.

 Features: one copy sheet and vacuum drying; white water circulation; electrical a sizing; compressed air homogenized manually homogenized, rapid release; microfiber and thick paper pages molding auxiliary equipment; spray washing device; countertops made of stainless steel (304L ), dried flattened body with elastic suction device, pattern dry thickness of up to 10mm, external water quick connector; users simply plug in the power cord, connect the water quick connector can work.

 Three kinds of drying interface:

1. The mirror panels dry.

2. The plastic panel dry.

3. glycerin capsules dry.

 Parameters:

1. Sample diameter: ≦ 200mm

2. Pump vacuum degree: -0.092 ~ -0.098MPa

3. Vacuum pressing force: ≈0.1MPa

4. The drying temperature: ≤120 ℃

5. Drying time (quantitative 30-80g / m2): 4-6 minutes; drain rate of 3s

6. Heating power: 1.5KW × 2

7. Dimensions: 1800mm × 710mm × 1300mm

8. Packing Size: 1940mm × 890mm × 1620mm

9. countertops made of stainless steel (304L).

10. The additional spray washing device.

11. Weight: 295Kg

12. Availability of water: the need for continuous water supply

 Accessories: porous stirrer, forming mesh 60 mesh, 80 mesh, press roll, standard press roll (304L), standard stainless steel press plate (mirror).