Automatic vehicle security private car parking barrier

Brand:aa

Product detail:

      Automatic vehicle security private car parking barrier  

        

 

Parking barrier:

  

 Specification of our 3 types of parking barrier

 

dimension	360W*300L*1030H(mm)	360W*300L*1030H(mm)	360W*300L*1030H(mm)
Weight	65KG	80KG	70KG
Motor power	100W	100W	100W
voltage	AC220V±10% 50Hz	AC220V±10% 50Hz	AC220V±10% 50Hz
working temperature	--40°C~+75°C	--40°C~+75°C	--40°C~+75°C
relative humidity	≤95% coagulation free	≤95% coagulation free	≤95% coagulation free
Remote control distance	<=30m	<=30m	<=30m
Arm direction optional:	leftward/rightward	leftward/rightward	leftward/rightward
Max beam length	<=6m	<=4.5	<=4.5m
Noise	≤60dB	≤60dB≤60dB	≤60dB
motor speed:	30r/min	30r/min	30r/min
Operating principle	Worm gear	Worm gear	Worm gear
beam	Straight beam	2 fence beam	90°foldable beam
Beam lifting time	3s/6s	6s	6s
MCBF	≥5,000,000 times	≥5,000,000 times	≥5,000,000 times
Working environments	indoor,outdoor	indoor,outdoor	indoor,outdoor

 

Features

  

Anti-collision protects boom arm (optional)

Once anti-collision mechanism installed, it will protects the boom arm not to be damaged once boom arm was collided by a vehicle.

  

Safety--- Anti-hit by Loop Detector (Optional)

While barrier boom moving down, If a coming vehicle was detected to be existing on the ground induction coil, the arm will go back to vertical position immediately until loop input was dismissed and then the arm will go down immediately.

 

Safety--- Anti-hit by IR photocell (Optional)

While arm moving down, If infrared transportation between transmitter and receiver is blocked by human or vehicle, the arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recovers.

   

Automatically close after the given time

Once this function is set “ON”, the barrier will automatically close after given time (1-90 seconds adjustable) if there is no vehicle passed after barrier open.

 

Automatically Close by loop detector (Optional)

If loop detector is installed, after vehicle passed the barrier will automatically close once the loop input was triggered

 

Automatically open by loop detector (Optional)

If loop detector is installed, when barrier boom is in horizontal position, the barrier boom will go up immediately once the loop input was triggered

 

Manually control in case of no power

Once power is off, just open the cabinet and manually control the barrier by a gear mechanism. Also barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlock manually.

 

Boom to open up fully or close down in case of power failure

If power is suddenly off while boom closing, boom will automatically close down fully if the angle between boom and vertical plane beyond 45 degree. If power failure occurs during boom opening, boom will automatically continue to open up fully if the angle between boom and level surface beyond 45 degrees.

 

Anti-condensation in cold climate

The barrier remains low power consumption even without closing and opening input, which will keep the motor in normal temperature. The lubricant will not be frozen so that the barrier will keep working in frozen environment

 

Transparent plastic covers on Control Board

A transparent plastic covers on the Control Board to makes Control Board water proof and dust proof, also protects operator.

 Details:

 

Variety:

 

Application(Parking management solutions):

 

 

 

 

Packing

 

 

Recommended products:

 

Our service

 

Reply your inquiry in 24 working hours.

 

Professional staff answer your questions in English.

 

Customized design is available,we can accept OEM & ODM.

 

Unique problems can be made solution by our professional engineers.

 

Special discount and protection of our distributors or agents in their area

 

Contact Informatinon:

Skype :cherry-yang2012

Tel: 86-755-29783835

Mobile: 86-18988760313

 

  Automatic vehicle security private car parking barrier