Full HD Vu solo clone Satellite Receiver Enigma 2 1300 MHz MIPS/1GB DDR3 DRAM by paypal free shippin

Brand:aa

Product detail:

Full HD Vu solo clone Satellite Receiver Enigma 2 1300 MHz MIPS/1GB DDR3 DRAM by paypal free shipping

1.Produce Type Name

Produce Type Number	HD DIGITAL DVB-S2 STB
STB Type	VU+ SOLO2
Main Chipset	BCM7356ZZKFEB3G
Func/Interface	RCA with CVBS, TV SCART *1, HDMI,ESATA,S/PDIF out , ETHERNET,  USB×3 , 2 x Smart Card Reader (Xcrypt), 1 x DVB Common-Interface Slot, Power switch
Heatsinking	Yes, Main Chip
Encrypt	yes
Video Modulator	yes
TUNER Type	Integration in the main control chip
Demodulator Type	Integration in the main control chip
Power Supply	Input:110-240V AC / 50-60Hz / 1,0 A ,Output: 12V = / 3.5 A

 

1.Front panel

 

 

Size	L:280MM  W:200MM  H:50MM
Panel display	VFD
Display Color	white
Standby	OK
USB	USB 2.0 High Speed HOST
Smartcard	Smart card slot (Xcrypt and Conax embeded)
Common Interface	1 x DVB Common-Interface Slot
IR	38KHz

 

 2.Back panel

 

 

 

The new generation VU+ Solo 2, twin tuner Linux-based high-end Full HDreceiver provides an unprecedented multimedia experience. The twin driveunit can record both the satellite and TIMESHIFT.  It has 1 x Common Interface slot and 2 x card reader (Conax u.XCrypt), EPG, Gigabit LAN, 1 x SCART, 1 x HDMI, 3 x USB 2.0 ports provide universal connectivity.

 

Experience high definition TV with your VU + Solo ². Full HD 1080p digital satellite receiver for digital TV and radio programs. The main feature of theVU + Solo ² is powerful 1300-MHz processor, 128MB Flash and 1GB RAM.

Technical highlights:

1300 MHz MIPS processor
128MB Flash
1GB DDR3 DRAM
Gigabit Lan
1 x DVB Common-Interface Slot
2 x Smart Card Reader (Xcrypt)
3 USB ports (1x front, 2x rear)
SPDIF optical audio output (digital)
1 x HDMI 1.4 video / audio output (digital)
1 x Scart (TV)
1 x RCA video output
2 x audio output (L / R) RCA (analog)
Plug and Play support for 2.5 "SATA - Hard Drives
unlimited channel lists for TV / Radio
EPG (electronic program guide) support
Support of Bouquet lists
OSD in many languages and skin-support
automatic / manual channel search
DiSEqC 1.0/1.1/1.2, USALS
External 12 volt power supply
Power switch

VU + Solo ² Specifications:

2 x DVB-S2 tuners
Input frequency range 950 .. 2150 MHz
Signal Level - 65 dBm ... - 25 dBm
Tuner Input Connector F-Type female
Input impedance 75 ohms
AFC + / - 3.5 MHz
QPSK and 8PSK demodulation
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35% Common-Interface:
Common-Interface Power Consumption max. 0.35 A/5V video decoding:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G / 25 Hz, NTSC
4:3 / 16:9
Letterbox for 4:3 TV-Device Output Digital:
Output Level 0,5 Vss on 75 Ohm
Frequency: 32 kHz, 44.1 kHz, 48 kHz
S / PDIF optical, coaxial (AC3) audio decoder:
Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main / sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L / R 0,5 Vss on 600 Ohm
THD> 60 dB (1 kHz)
Crosstalk <-65 dB Video parameter:
Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm TV Scart:
Output: FBAS, RGB, Ethernet over OSD:
1000/100/10 MBit compatible interface USB:
USB 2.0 connector (3x) LNB power and DVB-S2 Tuner:
LNB Current 400mA max. , Short-circuit proof
LNB Voltage horizontal "no load 19.5 V" 17.6 V at 400mA
LNB Voltage vertical "no load 14.5 V" 11,8 V at 400mA
LNB is switched off in the standby mode, control of the satellite position:
DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control Power consumption:
<13W (in operation, with LNB)
<12W (in operation, without LNB)
<0.5 W (Deep-Standby-Mode) Input voltage:
External power supply:
Input:
110-240V AC / 50-60Hz / 1,0 A
Output:
12V = / 3,5 A
 
Further information on VU + Solo ²

Ambient Temperature +15 ° C. .. +35 ° C
Humidity <80%
Dimensions (W x D x H): 280 mm x 200 mm x 50
Weight: 2.0 kg without HDD