Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Peco facet MPI-633-5SB coalescer filter element
The Facet Flushing Filter elements are designed to be used in place of coalescer elements in a coalescer separator vessel during flushing on new systems or when there’s been repairs to the existing equipment. The elements are less expensive than coalescer elements and have more filtration media for better solids holding capacity. Benefits, features and materials of construction are similar to our MP Series filter elements, except designed to flow inside to outside same as coalescer cartridges
Specification of MPI-633-5SB coalescer filter element
Recommended maximum operating temperature:240°F
Maximum differential pressure: 75 psi
Flow direction: Inside to out
pH range from 5 to 9
Single-piece construction
"Rod Mount” or “Screw base” options available
Material of MPI-633-5SB coaleser filter cartridge
All metal components coated to protect againstcorrosion
Gaskets are Buna-N—other materials available onrequest
Metal outer shell and core
Other model number for you chosing
| Model number | Micron rating | Norminal length (in) | Outside diameter (in) | Inside diameter (in) | Mounting style |
| MPI-622-2SB | 2 | 23 | 6 | 3 1/2 | SCREW BASE |
| MPI-628-2SB | 2 | 28 3/4 | 6 | 3 1/2 | SCREW BASE |
| MPI-633-5SB | 5 | 34 | 6 | 3 1/2 | SCREW BASE |
| MPI-638-5SB | 5 | 39 | 6 | 3 1/2 | SCREW BASE |
| MPI-643-0.5SB | 0.5 | 45 | 6 | 3 1/2 | SCREW BASE |
| MPI-643-5 | 5 | 43 1/4 | 6 | 3 1/2 | ROD MOUNT |
| MPI-643-5SB | 5 | 45 | 6 | 3 1/2 | SCREW BASE |
| MPI-56-0.5SB | 0.5 | 57 | 6 | 3 1/2 | SCREW BASE |
| MPI-656-1 | 1 | 56 1/4 | 6 | 3 1/2 | ROD MOUNT |
| MPI-656-2SB | 2 | 57 | 6 | 3 1/2 | SCREW BASE |
| MPI-656-5 | 5 | 56 1/4 | 6 | 3 1/2 | ROD MOUNT |
| MPI-656-5SB | 5 | 57 | 6 | 3 1/2 | SCREW BASE |
