hydraulic low pressure oil filter elements

 Description

Manfre's low pressure filters are suitable for a working pressure up to 1450 PSI (100 bar). Pressure filters are used to protect downstream components from contamination levels beyond the recommended cleanliness target. In systems using accumulators, pressure filters must be sized according to the large effective flow rates present during parts of the duty cycle.

Basic parameters

Product type

 hydraulic low pressure oil filter element

temperature range

+14°F to +176°F (for a short time +212F)  

operating medium:

mineral oil, other media on request

max. operating pressure

232 PSI

test pressure:

connection system:

SAE-flange 3000 PSI

sealing material:

 Nitrile (NBR) or Viton (FPM), other materials on request

Characters

1. The filters can be installed as suction filters, pressure filters or return-line filters.

2. filters are suitable for a working pressure up to 16 bar.

3. The filter elements are filter baskets with steel wire mesh as filter material. The perforated center tube is layed out with steel wire mesh. The flow direction is from inside to the outside.

4. In-line filters of the LF series are suitable for a working pressure up to 32 bar.

5. The LF Series filter element consists of star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive.

Product images 

OEM Service

YES

Standard Testing