Click for original picture
Brand:aa
Product detail:
Waste Tyre Pyrolysis Carbon Black Processing Plant
1. Application
HGM series ultrafine grinding mill is to produce particles between 325~2500 mesh /47-5micron.
HGM Series Ultrafine Grinding Mill is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs' scale of hardness under six.
2. Features
Avoid noise and pollution of the dust. One year' s warranty and tracking after-sales service. Free Initial installation at home and abroad. High safety and reliability.
3. Production Line Configuration
The whole set micronizer (HGM Ultrafine grinding Mill) consists of
1). Screw Conveyor, storage hopper, vibrating feeder/ Screw feeder,
2). Main unit, inverter classifier, cyclone collector, pulse deduster system,
3). High pressure positive blower, air compressors and electrical control systems.
4. How does it work?
1) After pyrolysis, the carbon black should cool firstly, then sent to the grinding mill.
2) When the ultrafine grinding mill is working, the granulated materials are crushed and grinded by the rollers into particles below 47micron.
3) The high-pressure air blower constantly inhales air within the grinding mill.
4) Along with the high speed airflow, micronized materials are brought to the classifier.
5) The qualified particles are screened and driven into the cyclone powder collector, finally exit from the discharging valve at the bottom;
6) A small proportion of the fine powders, with airflow, moves to the dust cleaner. Filtered clean air will be emitted from the air outlet of muffler in the end.
5. Specification HGM Grinding Mill(please consult for newest machine)
Model | HGM8021 | HGM9024 | HGM10027 | HGM10036 |
mm(Ring Diameter) | 800 | 900 | 1000 | 1000 |
Ring Number/ pcs | 3 | 3 | 3 | 4 |
Roller Number/ pcs | 21 | 24 | 27 | 36 |
Main Shaft Speed /r.p.min | 230 | 200 | 180 | 180 |
Input Size/mm | ≤20 | ≤20 | ≤20 | ≤20 |
Finished Size/μm | 5-47 | 5-47 | 5-47 | 5-47 |
Capacity t/h | 0.4-4.5 | 0.4-5.5 | 0.6-6.5 | 0.7 -7.5 |
Outlet Size LxWxH/m | 13.9x4x6.2 | 14.7x4.8x7.2 | 18x4.6x8.6 | 18x4.6x8.6 |
Power /KW | 145 | 192 | 263 | 263 |
6. Advantages
1.Jet mill, low capacity, if the output is very thin, it is just like a playing toy compared with Vertical Mill.
2. Raymond mill, only 50~325mesh, roller and ring will easily wear, as CB is sticky and inform a layer between roller and ring.
3. Ball mill, better for 50~200mesh, worst for CB, high power consumption, and worst performance.
