Xinxiang JZA-Used Rubber Pyrolysis Recycling Machine

Brand:aa

Product detail:

Xinxiang JinZhen Used Rubber Pyrolysis Recycling Machine

 

 

1. Domestic pioneer of this technology

a. In its key installment decomposition processor design, has thoroughly overcome the disadvantages of the domestic present vertical flat base split processor, such as bottom partial being heated non-uniformity, easy to break, low output, short service-life is short and so on, the main engine uses horizontal-type 360ostructure-0.4 R/M

b. Fast practical feed-in and discharge system. The highest feed-in quantity every 24 hour achieved 5 tons, Discharge time for 300kg carbon black only needs 90 minutes. The highest feed-in amount of the integral unit equipment every 24 hours achieves 15 tons.

c. Highly effectively gas heating system. In the process of refining oil, after the gas is heated up to 150 , it will produce a large amount of unliquefied gas-CH4& C4H8 , which cant be formed at normal temperature, normal pressure. If those gases have been fully burning by the specific designed gas nozzle, they can produce a great amount of energy and economize resources. Take the bunker coal as the example, when there is no fuel gas as combustion-supporting for the equipment, every 24 hours need 1.2 tons coals. After the fuel gas aid combustion, every 24 hour need 0.3 tons coal, which enhances production efficiency in the large scale and reduced the fuel cost?

d. Flue dust catcher system. It matches the bidirectional water impact type tornado dust removal room, and the rate of the flue dust catch is access than 95% .

 

Oil yied/day	Waste tire/ rubber	Big tyres	45%--50%
		Car tyres	40%
		Bicycles and motorcycles tyres	30%--35%
	Waste plastic	Fishing net Safety net , farm-oriented film	45%--50%
		Conwenient bags , weave bags	40%
		Off –cut of recycled paper mill	20%--30%

 

2.exhaust disposal system

1,unique design  inside the bag dedusting                            

2,the smoke from it is colorless and smelless, no different from the air, environment friendly

 

 

3.Environmental protective:

Dispose waste gas,liquid residua in the process:

1,waste gas:Transferred through two safety device:water close&burning air nozzle.Fully burnt,

not only eliminated pollutant but also minimized the quantity of fuels.For smoke dust discharge,we apply series machines of patent in our company desulphurization and dust remover

which could control the smoke dust discharge amount meet relative standards of GB-2001.

2,Waste liquid:Produced waste acidic water in the process of oil disposing(50kg process from 1 ton of oil easy to process for small quantity).Counteract the liquid by alkalescent liquid solution.After three stage of filtration,the litmusless waste water was introduced to evaporator(use the heat of the flue of main process as its heating resource)

3,Waste solid:The solid residua will be left after the catalyst splitting from scrap plastic,approximately composes the waste plastic weight about 5% to 10%.Its main component is the thick black carbon.

It can be the raw material of the production industry of black carbon.Also could be mixed with the pulverized coal ash which produces for the raw material thermal power plant,

also could be the raw material of manufacture pulverized coal ash brick(one kind of environmental protection building material).