Toone ZYS48-2Z 2NO&NC LED Second electric Delay Timer

Brand:aa

Product detail:

Toone ZYS48-2Z 2NO&NC LED Second electric Delay Timer

 

 

I. Brief Introduction

A. Power delay:

Contact the power supply, the product can start delay.

When the delay time reaches the preset time, the internal time relay pull-in.

B. Connect delay:

Only with power supply, the product can not start delay.

It needs to connect an external signal.

When the delay time reaches the preset time, the internal time relay pull-in.

C. Cycle delay: Contact the power supply,

it starts delay according to the expected time 1 (T1).

 Input the conversion, it starts delay in accordance with the expected time 2 (T2).

If make it reset, it will work in cycle.

D. Interval Delay: Contact to power supply or an external signal,

 the internal time relay pulls in, at the same time it starts delay.

When it reaches the preset time and the internal time relay will release.

 

II. Using Conditions

1. Sea level height: less than 2500m  

2. Surrounding temperature: -10-40

3. Ambient humidity: no more than 90%

4. Fluctuation voltage range: 85% ~ 110% rated voltage

5. DC power supply ripple factor: less than 5% Weight::about 80g

 

Technical Parameters

1. Rated voltage: 1. AC 2. DC 3.AC/DC  

380V, 220V, 110V, 48V, 36V, 24V, 12V

2. Repeat error: ≤±1%

3. Delay Accuracy: 0.03% 10mS

4. Voltage fluctuation error: during rated voltage: 85% 110%, error±5%

5. Temperature error: during temperature: -10 ~ +40 , error ≤±10%

6. Contact Capacity: AC250V 5A  coos1 DC12 7A

7. Installation: panel type, device type, guide type

8. Mechanical life: 1000,000 cycles

9. Electrical life: 100,000 cycles

 

Item	Delay timer
Model	ZYS48	ZYS48-2Z	ZYS48-A	ZYS48-S	ZYS48-M	ZYS11
working voltage	DC 12V,  24V,  36V,  AC110V,  220V,  380V,  Scope 85%~110%50Hz				AC/DC90-265V	AC/DC24-240V
	The working voltage can be selected from.				(wide working voltage, AC and DC can work)	(wide working voltage, AC and DC can work)
capacity	1NO 1NC	2NO 2NC	2NO 2NC	1NO 1NC	2NO 1NC	1NO 1NC
working modes	on delay	on delay	on delay	delay in cycle	Multifunction	Multifunction
delay timing arrange	0-9999h, 0-999.9h, 0-9999m, 0-999.9m, 0-99990s,			0-99h, 0-9.9h, 0-99m, 0-9.9m, 0-990s,0-99s,0-9.9s	0-9999h,0-999.9h, 0-9999m, 0-999.9m, 0-99990s,	0.6s-100h
	0-9999s, 0-999.9s, 0-99.99s, 0-99m99s, 0-99h99m				0-9999s, 0.1s-999.9s,
					0-99.99s,0-99m99s,0-99h99m