Click for original picture
Brand:aa
Product detail:
Specifications
RTV-2 liquid molding silicone features:1)good tensile&tear strength2)delicate duplication efforts
RTV-2 liquid molding silicone Applications of RTV-2 liquid molding silicone
tin cure silicone rubber for molding is primarily intended for poly resin crafts,PU crafts,PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory,Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Features of RTV-2 liquid molding silicone
tin cure silicone rubber for molding is white or translucent flowing liquid with general hardness of 22-50shore A after curing. Molding silicone rubber is a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength ,tear strength and elongation, Stripping the gender is good, Linear shrinkage rate low, Size stability is good.
Data of Liquid Silicone Rubber for mouldmaking (MSDS) Tin condensation Rubber series
Model | Color | Viscosity (±2000) Mm2/s | Hardness | Tensile Strength (Mpa) | Tear Strength (KN/mm) | Elongation | Mixing ratio (%) | Pot life | Demould time (H) |
RXD925 | translucent | 24000 | 26±1 | 3.5~4.0 | 4.0~4.5 | 300-400 | 2~3 | 10-30 | 2~6 |
RXD930 | translucent | 25000 | 30±1 | 3.5~4.0 | 4.0~4.5 | 300-400 | 2~3 | 10-30 | 2~6 |
RXD935 | translucent | 26500 | 37±1 | 3.5~4.0 | 4.0~4.5 | 300-400 | 2~3 | 10-30 | 2~6 |
RXD940 | translucent | 27000 | 39±1 | 3.5~4.0 | 4.0~4.5 | 300-400 | 2~3 | 10-30 | 2~6 |
RXD803 | white | 28000 | 37±2 | 3.2~3.5 | 3.5~4.0 | 250-300 | 2~3 | 10-30 | 2~6 |
RXD603 | white | 26000 | 38±2 | 2.2~2.5 | 2.5~3.0 | 150~200 | 2~3 | 10-30 | 2~6 |
RXD300 | white | 26000 | 37±2 | 2.0~2.2 | 2.0~2.5 | 150~200 | 2~3 | 10-30 | 2~6 |
Note: according to user's requirements, production, commissioning, different color and performance products
FAQ of RTV-2 liquid molding silicone
Why should the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicone rubber.
b. Using the silicone rubber with a high hardness to make molds for small sized products
with delicate and intricate designs .
Payment: cash, bank transfer, the collection of money, pay treasure, paypal
Packing: 25KG, 200KG
Quality/security authentication: the RoHS, MSDS, SGS
Sample: free
Delivery time: three days
Whatever you have any further information required or suggestion, pls feel free to send also can call mobile 0086-13640666312(Ms.faa),
