Low density oil & gas ceramic proppant sand

Brand:aa

Product detail:

    Low density oil & gas ceramic proppant sand        

 

1. Advantage of  ceramic proppant sand        

 

ceramic fracture proppant is maily made from professional  bauxite, which is much better than ordinary concrete, as it has qualities of corrosion resisting and alkali-aggregate reaction resisting.

 

2.Performances of  ceramic proppant sand        

 

1,Light and low density

 

2,Heat retaining and good insulating

 

3,High refractoriness

 

4,Shock resistance

 

5,Good  alkali-aggregate reaction resisting ability

 

6,Can increase oil production as high as 30%-50%

 

7,Increase life span of oil gas well

 

3. Application of  ceramic proppant sand       

 

1,As oil fracturing proppant

 2,As refractory material

 3,Construction industry

 

4.Physical and chemical index  

 

Specification Performance		Sphericity	VolumeDensity g/cm3	Apparent Density g/cm3	Turbidity NTU	Difficult Solubility %	Crushing Capacity %
							52MPa	69MPa	86MPa
Low density product	70/140 mesh	≥0.7	≤1.65	≤2.95	≤90	≤7.0	≤7.0	/	/
	0.212-0.106mm
	40-70mesh	≥0.7	≤1.65	≤2.95	≤80	≤7.0	≤7.0	/	/
	0.425-0.212mm
	30-50mesh	≥0.9	≤1.65	≤2.95	≤80	≤7.0	≤8.0	/	/
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.65	≤2.95	≤80	≤7.0	≤8.0	/	/
	0.85-0.425mm
Middle density product	40-70mesh	≥0.7	≤1.80	≤3.38	≤80	≤7.0	≤5.0	≤8.0	/
	0.425-0.212mm
	30-50mesh	≥0.9	≤1.80	≤3.38	≤80	≤7.0	≤5.0	≤8.0	/
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.80	≤3.38	≤80	≤5.0	≤5.0	≤8.0	/
	0.85-0.425mm
	16-30mesh	≥0.9	≤1.80	≤3.38	≤80	≤5.0	≤14.0	≤20.0	/
	1.18-0.60mm
High density product	30-50mesh	≥0.9	≤1.88	≤3.50	≤80	≤5.0	/	≤5.0	≤9.0
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.88	≤3.50	≤80	≤5.0	/	≤5.0	≤9.0
	0.85-0.425mm
	16-30mesh	≥0.9	≤1.95	≤3.50	≤80	≤5.0	/	≤14.0	≤20.0
	1.18-0.60mm
	12-20mesh	≥0.9	≤1.95	≤3.50	≤80	≤5.0	/	≤18.0	≤25.0