Lab Multi-Gas detectors Manufacturer

Brand:aa

Product detail:

CPR-KA Air Quality Monitoring System consists of SO2 analyzer, NOX (NO2/NO) analyzer, O3 analyzer, CO analyzer, PM10 analyzer, VOC analyzer, THC analyzer and meteorological multi-parameter monitor, etc.

CPR-KA Air Quality Monitoring System is developed with international electronic technique and network communication based on the fixed electric potential electro-analysis principle, monitoring of polluted gas, light scattering principle and β ray method.

PRODUCT FEATURES

l Rational design, easy to be used as a portable or automatic continuous online monitoring instrument;

l Easy to monitor all Gas parameters and PM10 whose value will be shown on the screen as well;

lAutomatic sampling and analyzing continuously when it used as back pack instrument;

l High-sensitivity sensor, rapidly response, high resolution ratio, Detecting inferior limit can be achieved ppb;

l Measured concentration value can be realized through switchover among mg/m3,ppm,ppb with trends graphs;

l Display with graph screen, directly shows all kinds of inspection data, graphs and machine status, providing friendly man-machine talk interface;

l SCM( single-chip microcomputer) mixed with internet communication along with the function of data storage, providing convenient way of data inquiry, also can transfer the data to computer by USB, its daily average value, monthly average value, and pollute index can be auto-calculated by upper computer software, printed in different kinds of graphic data.

l Lithium battery or outer A.C., if power-off, the battery can be worked for 8 hours continuously.

l Stable, high-accuracy, easy to use and maintain protection when power-off.

 

Control Process Diagram

  TECHNICAL PARAMETERS

Operating Temp.	5-40ºC	Storage Temp.	-20-40ºC
Operating Humidity	≤15%-85%RH       no condensation	Linearity	±2%F.S
Accuracy	±2%F.S	Zero Drift	±2%F.S
Response Time	<150s	Range Drift	±2%F.S
Flow of Gas Sample	300ml/min	Working Life of Sensor	>2 years
Way of Sampling	Absorb Pump	Flow of Dust Sample	5.0L/min or 600ml/min
Communication Interface	RS485 and USB Interface	Power Supply Mode	Lithium battery(3.6V*)                   Outer A.C.(AC220V 50Hz 1.0A)
Operating Life of Battery	Continuous 8 hours	Charging Time	10 hours
Size	300 x 260 x 490mm	Weight	15kg

Touch Sreen.

 

Gas Monitoring Parameters: