Automatic Extrusion Blow Moulding Machine with 120L/Single station

Brand:aa

Product detail:

 

 

 

Auto Extrusion Blow Moulding Machine(JN-S120L)

 

    ♦ Single station

    ♦ The Max. product volume is 120 liters.

    ♦ The extrusion material store capacity is 12.8L.

 

 

The Features

 

1. The screw adopts high potency melt to make sure the material well mixed.
2. Adopt the frequency control of motor system to reduce the power consumption.
3. Adopt horizontal movement frame to improve stability and speed.
4. The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase the life span.
5. High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
6. The extrusion head use spreader or screw type to well mixed the thickness and easy to change the different color.
7. Advances design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
8. The precise time control system assured good quality, suitable weight and reduces production cycle.
9. Freely to move the extrusion foundation backward and forward to make the exchange of the mold easy.
10. Multi-function bottom blowing type for shaped products.
11. The mechanical arm can take out the products automaticaly.

 

 

 

 

General Specifications(JN-S120L)

 

Max. product Volume    (L)	120
Dry cycle   (pc/h)	360
Screw diameter    (mm)	100
Screw L/D ratio     (L/D)	24~26
Screw motor power    (kw)	45~75
Screw heating capacity    (kw)	8.4~10.5
No. of heating zone    (zone)	4~5
Output of HDPE    (kg/hr)	200~280
Oil pump driver power    (kw)	37
Clamping force    (KN)	440~650
Mold Stroke    (mm)	500~1400
Size of Mold (W*H)     mm	900*1450
Max. Dia Diameter    (mm)	420
Die Heat Capacity    (kw)	10.8
Blowing Pressure  (Mpa)	0.8
Air Volume    (M³ /Min)	1.6
Cooling Water Pressure    (Mpa)	0.3
Water Consumption    (L/min)	150
Weight of Machine    (Ton)	17
Size of Machine(L*W*H)    (m)	5.2*2.5*4.2

 

 

 

 

 

 

 

Main Characteristic:

 

1.  Single station, single layer, 100mm screw, 45~75kw screw motor power, PE / PP etc.

  

2.  Power supply: 380VAC, 50Hz  (depending on client's county ).

  

3.  One die Head(the picture is in the below);

 
4.  MOOG 100 Points Parison Controller (Optional)

 

                                                                                                                                                          

 

 

 

 

 

 

 

Component Parts

( Type C Machine Component List )

 

1.  PLC controller: Germany SIEMENS
2.  France Schneider low-voltage apparatus
3.  Domestic test components
4.  Siemens Beide electrical motor
5.  Taiwan Delta VFD-B frequency
6.  USA Vickers hydraulic valve
7.  Taiwan Airtac air valve(UAS numatic air valve)

 

 

 

 

• •       No 1 & No 5. Eelectrical control panel
  •             Brand: Schneider and OMRON

 

• •       No 2. Pneumatic System
  •             Brand: Schneider

 

• •       No 3. Oil Pump/Selector Valve
  •             Brand: Northman or Vickers

 

• •       No 4. Oil Pump/ Selector Valve
  •             Brand: VICKERS or YUKEN

 

• •       No 6.  Hydraulic System
  •             Brand: Taiwan Northman, Japan YUKEN, and America VICKERS

 

• •       No 7. Parison Controller
  •             Brand: MOOG(100 points)

 

• •       No 8. PLC
  •             Brand: SIemens