Click for original picture
Brand:aa
Product detail:
Saiob vacuum suction flexo printing slotting die cutting
Introduction of the complete machine.
1.Touch-screen and electrical dual control system .
2.Transmission gears adopts high quality alloy steel (20CrMnTi),with hardness HRC58-62 after carburizing,quenching and grinding.
3.Key free connection decrease the connection clearance,maintain the overprint's precision of long-term printing .
4.With automatic zeroing ang mermory reset functions.
5.Carton production for small specifications.
6.Entire process with ceramic roller vacuum suction transport system
7.Transmission structure with double oil pump circulating lubrication.
Feeding unit
1. Suction-assisted lead edge feeder.
2. optional continuous or skip feeding,with a counter display production quantity
3.Feeder rail adopts linear bearings, feed smoothly, correctly
4.Automatic feed and anilox roll joint operation, reduce the waste of cardboard
5. With sucked crumbs dusting machine, can improve the printing quality
Printing unit
1.Roller vacuum suction transport system
2. Plate rollers, embossing rollers are made of high-quality steel with grinding and hard chrome plating
3. Dynamic and static balance correction, Smooth operation
4. Adopts hanging mechanism , installation convenient and fast
5. loading and unloading the printing version is optional of foot switch or electric button to control positive inversion
6. With feeder system pneumatic automatic lifting device (By feeding will the anilox roller down and contact with the plate, when stop feeding will the anilox roller up and separated with the plate.
7. phase adjusting mechanism with planetary gear structure
8. the printing phase adopts PLC, touch screen control and electric digital 360 adjusting. Plate rollers with automatic zeroing , dynamic and static phase adjusting.
9. electric Digital display adjust the lateral position of plate roller, adjust distance of ± 10 mm.
10.the printing phase fixing device with Electromagnetic clutch braking mechanism ; when the machine separated or adjusting the phase, the braking mechanism will restricted machine rotation, keeping the original printing position.
Slotting unit
1. HMI and electric buttons adjustment dual system, can complete the adjustment of slotting Height, phase, axial movement.
2.Configured self-locking preload fast transfer mechanism, ensure the long-term accuracy between disk and axis , and slow down the damage to cardboard when pressing line.
3.Pressing line upper wheel wrapped with the quality polyurethane, guarantee a cardboard hardness from destruction
4. Synchronous linkage electric axial movement make the upper and under pressing line wheel, upper and under slotting, upper and under guide wheel synchronized adjust; Self-lubricating wear - resistant guiding mechanism, assurance the long-term correctly and increase durability
5.pressing line and slotting wheel axle adopts high quality alloy steel, with grinding and hard chrome plating; Respectively be corrected by rough and fine dynamic balancing equipment, to find the best balance
6.Adopts high quality alloy steel slotted knife, tooth profile blade width of 7mm
Die-cutting unit
1. Cushion roll, template roller adopts quality steel after dynamic balancing correction, to increase operational stabilit
2. By Not die-cutting state template roller and cushion roll will through a cylinder eccentric device automatically disengaged, that can reduce the machine-load when no load, and effectively extend the life of Urethane and knife mold.
3.Mechanical transmission Urethane can move around ± 30mm, and with a radial differential device, evenly distributed the wear of cushion roll and thus greatly increase the life of cushion roller.
4.Mechanical transmission Urethane can move around ± 30mm, and with a radial differential device, evenly distributed the wear of cushion roll and thus greatly increase the life of cushion roller.
5. Unique differential speed compensation device, regardless the diameter change of cushion, speed difference compensation device makes Urethane roller slide with the template roller, and thus the surface speed of rubber pad completely manipulated by knife mold , so die-cut carton is exactly the same as the mold.
Stacker
1.Receiving arm can be set to automatic or manual operation.
2.Receiving arm transmission belts can individually adjust the tightness, and free to chosen the number of receiving arm.
3. Palletization height is 1600mm.
4. Lifting transmit motor of machine table with brake function, to maintain a fixed position, not decline.
5. By a predetermined height the air pressure receiving arm will automatically extended, lift up the cardboard.
6.Plane wrinkles belt, to prevent cardboard decline.
SAIOB-Main Specifications
Model | 1800/2200*1000 | 2500*1200/1600 | 2800*1200/1600 | 3200*1600 | |
Max.Speed (pcs/min) | 220 | 180/150 | 160/150 | 140 | |
Max. Feeding Size(mm) | 1800/2200*1000 | 2500*1200/1600 | 2800*1200/1600 | 3200*1600 | |
Min. Feeding Size(mm) | 650*400 | 650*450/500 | 650*450/500 | 650*500 | |
Skip feeder size (mm) | 1800/2200*1200 | 2500*1400/1800 | 2800*1400/1800 | 3200*1800 | |
Feeding Depth(mm) | 2-10 | 2-10 | 2-10 | 2-10 | |
Max printing area(mm) | 1750/2150*950 | 2450*1180/1580 | 2750*1180/1580 | 3150*1580 | |
Print plate Depth(mm) | 7.2 | 7.2 | 7.2 | 7.2 | |
Min slotter interval | Positive cut(mm) | 120*120*120*120 | 140*140*140*140 | 140*140*140*140 | 140*140*140*140 |
Reverse cut(mm) | 190*60*190*60 | 220*60*220*60 | 220*60*220*60 | 220*60*220*60 | |
Max Die cutter size(mm) | 1700/2100*930 | 2400*1150/1550 | 2700*1150/1550 | 3100*1550 | |
