Click for original picture
Brand:aa
Product detail:
Dry-mix shotcrete machine
1,Advantages: This is a high-effective shotcrete machine ,which is mainly used for dry-mix, damp-mix shotcreting and steel fiber reinforced shotcreting.
2,Non-adhesion going through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
3,Four-point clamping device make it easy to adjust the press between sealing plate and rotor disk so as to no air and dust leak and prolong consumption parts life.
4,Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shotcrete quality.
the PZ dry-mix shotcrete machine is fit to the air compressor as below:
| Item | VF-10/7D electric motor fixed air compressor | VF-10/7C Diesel fixed air compressor | ||||||
| Exhaust Volume (m3/min) | 10m3/min | 10m3/min | ||||||
| Exhaust pressure (Mpa) | 0.7 | 0.7 | ||||||
| Cylinder(DiaXQty) | 260mmX2pcs/160mmX2pcs | 260mmX2pcs/160mmX2pcs | ||||||
| Power | 65kw electric motor | QC 4108 Diesel engine | ||||||
| Volume of gas storage tank | 600L | 600L | ||||||
| Dimension(LXWXH)mm | 2400X1200X1450 | 3800X1200X1450 | ||||||
| Whole weight | 1750kgs | 1900kgs |
Item
| PZ-3 | PZ-5 |
Output | 3.5m3/h | 5m3/h |
Max. convey dist | Horizontal:200m Vertical: 20m | Horizontal:200m Vertical: 20m |
Water cement ratio | ≤0.4 | ≤0.4 |
Max. Aggregate. size | 20mm | 20mm |
Hose inner size | 38mm | 51mm |
Operating air pressure | 0.4~0.6MPa | 0.4~0.6MPa |
Air consumption | 3-4 m3/min | 7-8 m3/min |
Rotor diameter | 350mm(150) | 438mm |
Motor power | Y112M-6-3KW | Y132-6-5.5(KW) |
Voltages | 380v or as your requirements | 380v as your requirements |
Overall dimension(mm) | 1040X550X940 | 1280x700x1280 |
Whole weight | 260kgs | 600kgs |
wheel | Nylon wheel or Rubber wheel | |
