Brand:aa
Product detail:
888 Hot Electric Stacker With AC Curtis Control Reach Stacker
1.5T full electric stacker CDD15 series full electric stacker, rated load 1500kg, lifting height is 2000mm\2600mm\2900mm\3300mm\3600mm\4000mm,
the mostprestigious international SA card (ZAPI) AC controller, to provide warehousing logistics stacking for you the best choice.
The performance of product advantage
1 High performance
1 high-power AC drive system makes the vehicle more responsive, more precise control, to run more smoothly,
the battery service life is longer, higher working efficiency
2 the latest imported AC controller, reliable quality, excellent performance, with regenerative braking,
reverse braking, self diagnosis and various adjustable parameters and other functions, can make the motion
performance of the vehicle to achieve the best condition of different operation condition
3 reliable hydraulic station, low noise, small vibration, good sealing performance, no-load
full load drop speed automatic adjustment, to ensure stable and reliable hoisting and descending.
4 overweight chassis design, ensure vehicle stability, provide a lift of 2 meters to 4 meters with a variety of.
5 large capacity, convenient and quick charging, battery lasting.
6 high precision built-in adjustable roller, to ensure the smooth lifting down.
7 super portal frame and body design, safe and reliable.
8 unique five fulcrum structure and driving wheel damping system, according to the vehicle usage in the automatic
adjustment, vehicle stability is better.
9.IP54 protection grade, can effectively splash and dust resistant, effectively extending the service life of electrical system.
10 of all cables are reliable protection and application of vehicle special cable high temperature resistant flame-retardant, greatly reduce the vehicle failure rate
2More secure
1 reliable electromagnetic brake the parking brake is guaranteed, can ensure the vehicle
can equally safe parking on a slope
2 emergency reverse function, so that the operator avoid injury.
3 machine, cylinder, three electronic weight lifting limit protection, safe and reliable.
4 installation of explosion-proof safety valve, effectively avoid the failure in the high-pressure oil pipe under the condition of the cargo fast falling, ensure personal safety.
5 hydraulic system, effectively avoid overloading of vehicles using the vehicle safety, protection.
6 fork lift height greater than 300 mm when the speed reduced automatically, ensure goods safety of walking.
7 emergency brake button switch, makes the operation easier in case of emergency, the safety is better.
8 door frame installation quality safety protection cover, the operators are protected from accidental injury.
9 turtles, accurate and convenient operation operator in narrow space.
3 Easy to operate the electric stacker
1 according to the control handle, ergonomic design simple and attractive,
operation function all can easily achieve button control.
2 automatic folding pedal (optional) and protection (optional) with the length
of the handle arm operation right, greatly improve the comfort.
3 automatic folding pedal (optional) can reduce operator fatigue during long time operation.
4 ascending, descending button around the same time the distribution of left and right hand,
convenient operation, to adapt to different operating habits.
5 car charging device (optional) design, convenient vehicle charging in different places.
4 Easy to repair the electric stacker
1 body is convenient to disassemble, open the outer cover, the main components can be
immediately detected repair, convenient replacement parts.
2 controller, through the hand-held unit fault display, solve the fault more convenient.
3 maintenance free AC drive motor, brushless DC motor, without regular replacement
brush troubles, greatly reduced maintenance costs.Design of
4 integrated micro switch, is very easy to replace
5 module design and large maintenance space, better repair performance
Electric stacker detailed technical parameters
| Characteristic | With the battery weight | 955/990/1005/1030/1047/1070kg |
| The full bridge load before / after | 1190/1325kg | |
| No-load bridge load before / after | 745/260kg | |
| Wheels, body | Tires: rubber wheels, high elastic body, pneumatic wheels, polyurethane wheels | Polyurethane wheel |
| Wheel size | 250×80 | |
| The rear wheel size | Twowheel80×70 | |
| Singe wheel80×93 | ||
| Additional wheel size | 150×54 | |
| Number of wheels (front / back) (x= driver) | 1x+2/4 | |
| Front wheel tread | 685mm | |
| Rear wheel tread | 390/515mm | |
| Right angle stacking tray channelwidth,1000X1200 (1200 cross forkplaced) | 2160mm | |
| Right angle stacking tray channelwidth,800X1200 (1200 cross forkplaced) | 2135mm | |
| Turning radius | 1480mm | |
| Performance | Load / no-load speed | 5.1/5.7km/h |
| Hoisting speed full load / unload | 95/136mm/s | |
| Decrease the speed of load / no-load | 100/95mm/s | |
| Maximum gradeability loaded / unloaded | 2013-6-12% | |
| Brake | Electromagnetic brake | |
| Electric machinery | Driving motor power | 1.5kw |
| Lifting motor power | 3kw | |
| Battery DIN standard is / is not | YES | |
| The battery voltage and rated capacity | 2×12/210V/Ah | |
| Battery weight + 5% | 205kg | |
| Other | Drive control type | AlternatingAC(ZAPI) |















