Click for original picture
Product detail:
Welded helical finned tubes are used in boilers, furnaces and fired heaters. A continuous helical fin is attached to the base by high frequency electric resistance welding in order to give an efficient bond. Fins can be either solid or serrated.
Tube and Pipe sizes available
Tube OD: 25.4 / 31.8 / 50.8 / 63.5 and 76.0mm
Pipe OD: 88.9 / 101.6 / 114.3 / 141.3 / 168.3 and 219.1mm
Tube/Pipe Thickness:
Minimum 2.13mm (solid fin), 1.9mm (serrated fin)
Minimum thickness is also dependant on the fin thickness and tube/pipe OD
Fin Height Range
Solid fin:6.3mm-31.8mm Serrated fin: 12.7mm - 38.1mm
Fin Height is dependant on the fin type (solid or serrated) tube OD, fin thickness and material.
Fin thickness is dependant on the fin material, height of the fin, and tube OD. Usually between 1.0mm and 3.4mm
Fin Density is dependant on the fin type (solid or serrated) tube OD, fin thickness and fin material. Density is generally between 1 fin/inch and 7 fins/inch. Materials for both tube/pipe and fin can be a combination of carbon steel, low alloy steel and stainless steel.
