NJW Nanaboshi Connector

Product detail:

 

 

A variety of Waterproof connectors that cater to control equipment, measuring equipment, and various purposes including power supply.

Waterproof metal connectors designed to be water resistant when connected.

Special surface treatment adopted, different from the conventional surface treatment.

Products compliant with the Electrical Appliances and Material Safety Act.

Products certified by UL/CSA standards. UL1977 C22.2No.182.3

Water resistance: No trace of water exposure after being left under water pressure of 40 kPca for 24 hours, in its normal state of use.

Shell size 16-32, contacts:2–37.

We also carry stocks in all sizes of regular contacts and reversed contacts (excluding some).

 

Property

• And insulation resistance: when measured at a specified voltage between conductors closest is 1,000 MΩ or higher.
• Withstand voltage: If you applied for 1 minute to the specified voltage between conductors is closest, there is no abnormality such as a short circuit.
• Contact resistance: conductor resistance when the length of a regular up bonded with the contact pair is 5 mΩ or less.
• Shockproof: When you make vibration test, there is no functional trouble, contact resistance is less than 5 mΩ.
• Shock: when you make impact test, there is no functional trouble, contact resistance is less than 5 mΩ.
• Moisture resistance: after the humidity test, no trouble Functionally, the insulation resistance is 10 MΩ or more.
• Temperature cycle: after the temperature cycle test, no trouble Functionally, insulation resistance is 1,000 MΩ or higher.
• Salt spray: after the salt spray test, there is no trouble Functionally, the contact resistance is 5 mΩ or less.
• Waterproof: With you normally use, was allowed to stand for 24 hours under water pressure 40kPa, there is no evidence of flooding.