EN345 Annkle Rubber Boot Safety Work Shoes

Product detail:

Product : EN345 ANTISTATIC SAFETY BOOT. 

Colour : Black 

Size Range : Euro 37 - 48 

Type of construction : Vulcanized Rubber Upper and Sole. 

Compliance : 
European Standard, CE Approved - EN 345-1:1992(SB-A-P-E-HRO or S5 HRO) 
Malaysian Standard, MS 1599:1998 (SB-A-P-E-HRO) 

Air pressure applied for water leakage testing : 50kPa 

Lining Material Leg Lining : 
Polyester. Weight (min.) 230g/m2. Thickness (min.)0.80mm. 

Insole Lining : 
Woven. Sheeting Weight (min.) 140g/m2. Thickness (min.) 0.30mm. 

Rubber Components : 
Upper & Foxing - Black in Colour, 70% Natural Rubber 30% Styrene 
Butadiene
Rubber. 

Thickness of Upper and Fabric Combined : 
1.60mm (Minimum) 

Sole / Heel: 
Black in Colour, 80% Nitrile Butadiene Rubber & 20% Chloroprene Rubber. 
Antistatic properties - range of electrical resistance, 100k ohm to 
<1000M
ohm 
Oil Resistant - Immersion in iso-octane (22 hours at 22 degreeC) 12% 
max
change in volume. 
Abrasion Resistant - EN 344-92 : 250mm3 max. volume loss. 
Hardness Shore A : 60 +- 5. 

Optional Sole Protection : 
Resistance to Hot Contact - Meets EN 345-2 
Energy absorption - Meets EN 345-2 

Steel Midsole : 
Stainless Steel, meets CSA-Z195-02 Sole Penetration and EN 345 Flexing 
test.


Steel Toe : Meets EN 345 Impact and Compression. 
Finishing : Hypalon Lacquer. 

Packing Polybag 6 pairs / carton. 

Minimum order quantity : 3000 pairs