Click for original picture
Product detail:
Brief Introduction.
This Type of PRV is a new product developed by us,through our continuous improvement,it already becomes a substitute for the same kind of products abroad,its special character is that working area of memberance is larger than other spring diaphragm pressure reducing valve,therefore,it can sensor the micro pressure change from downstream(such as 0.01 Mpa) and make immediate regulating.As its good performance of reducing and sustaining pressure,it is widely usded for the pipelines which inlet pressure and outlet flow change much.Field of Application.
Product Name: YT11 High Sensity Diaphragm Water Pressure Reducing Valve.
Pressure Rating: 1.6- 2.5 Mpa.
Nominal Diameter: DN15-50 mm.
Body Material: Steel WCB,Stainless Steel.
Standard Screws: NPT,BSP.
Main Technical Parameters and Indexes of Performance.
| DN | 15(1/2") | 20(3/4") | 25(1") | 32(1-1/4") | 40(1-1/2") | 50(2") |
| Cv | 1.2 | 2.2 | 4 | 7 | 12 | 19 |
| Maximum Inlet Pressure(Mpa) | 1.6 | |||||
| Range of Outlet Pressure(Mpa) | 0.03~1.0 | |||||
| Maximum Working Temperature | 80 | |||||
Material of Main Component.
| Name of Components | Material of Components |
| Valve body, valve cover | WCB |
| Valve seat | 2Cr13 |
| valve flap | 2Cr13 |
| Valve rod | 2Cr13 |
| Membrane | 1Cr18Ni9Ti |
| Adjusting spring | 60Si2Mn |
Main External Dimensions.
 |
| DN | G | L | H1 | H | D |
| 15(1/2") | Rc1/2" | 95 | 55 | 170 | 100 |
| 20(3/4") | Rc3-4" | 95 | 55 | 170 | 100 |
| 25(1") | Rc1" | 100 | 60 | 190 | 120 |
| 32(1-1/4") | Rc1-1/4" | 165 | 75 | 220 | 150 |
| 40(1-1/2") | Rc1-1/2" | 190 | 90 | 250 | 180 |
| 50(2") | RG2" | 200 | 110 | 300 | 220 |
