Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Flanged high temperature stainless steel solenoid valve
Introduction:
1. For the pilot type structure,
2. Seat sealing material of TEFLON+ metal,
3. The highest temperature of 250 degrees by pilot valve,radiator,
4. Piston(the main valve)combination of the formation of the structure design.
5. Electricity open, power off closed. It is the common executive device of the
automatic control system.
6. Mainly used in steam,heat conduction oil ,high temperature medium in the pipeline
of automatic opening and closing,
7. Thus achieve the procedure control or remote control etc of system and equipment.
Specifications:
Quick start, long service life.
- High temperature class H coil.
- Pilot piston type structure, temperature less than 250 centigrade.
- Adopt pilot valve,radiator,piston(the main valve) combination of the formation of the structure design.
Technical parameters:
Body material | SS304,SS316 |
Environment temperature | 0°C~65°C |
Medium temperature | 5°C~250°C |
voltage | AC220V/230V DC24V 50/60HZ±10% permitted range |
The highest pressure | 16kgf/cm2 |
Structure form | Pilot type:3/8''~2'' |
Connection type | Thread,Flanged |
Diaphragm sealing | TEFLON |
Coil | Standard class H metal cover shell outlet type |
Applicable medium | Water,air,heat conduction oil,steam, etc |
Type specification Table:
Meet thread | Flow size mm | CV value | Range of working pressure (Kgf/cm2) | The maximum temperature°C | Outline dimension
| Order symbol The following table for voltage 220VAC 50/60HZ | ||
Heatconduction oil | Steam |
| length× width× height | |||||
3/8” | 15 | 4.5 | 05 | 16 | 16 | 250 | 75×52×159 | POH-14 |
1/2” | 15 | 4.5 | 0.5 | 16 | 16 | 250 | 75×52×159 | POH-15 |
3/4” | 20 | 8.0 | 0.5 | 16 | 16 | 250 | 85×60×171 | POH-20 |
1” | 25 | 12 | 0.5 | 16 | 16 | 250 | 100×70×178 | POH-25 |
11/4” | 35 | 22 | 0.5 | 16 | 16 | 250 | 120×90×198 | POH-32 |
11/2” | 35 | 22 | 0.5 | 16 | 16 | 185 | 120×90×198 | POH-40 |
2” | 50 | 45 | 0.5 | 16 | 16 | 250 | 150×110×220 | POH-50 |
Flange 4 hole | 25 | 12 | 0.5 | 16 | 16 | 250 | apertureφ13.5 pitchφ85 | POH-25F |
134×110×215 | ||||||||
32 | 22 | 0.5 | 16 | 16 | 250 | apertureφ17.5 pitch φ100 | POH-32F | |
160×135×230 | ||||||||
40 | 22 | 0.5 | 16 | 16 | 250 | apertureφ17.5 pitchφ110 | POH-40F | |
160×145×235 | ||||||||
50 | 45 | 0.5 | 16 | 16 | 250 | apertureφ17.5 pitchφ125 | POH-50F | |
200×155×250 | ||||||||
