Tyre Valves Of Supplier

  Tyre Valves Of Supplier

   Tyre Valves Of Supplier

The closing piece of one piece-type ball valve is a sphere, the sphere rotates the center line as a rotary valve to achieve open and close. Valve is mainly used to do cut, distribute and change the direction of media flow in pipeline.
Advantages:
1.Small fluid resistance, the drag coefficient is equal to the same length of pipe.
2. Simple structure, small size and light weight.
3. Solid and reliable, the material sealing surface is currently widely used of plastic, sealing well, has also been widely used in the vacuum system .
4. Easy to operate, open and close rapidly, from fully open to fully closed as long as rotate 90 ° to facilitate remote control.
5. Easy maintenance,simple, seal ring is general movable, easy to dismantle and replace.
6. Sealing surface of ball and valve seat is separate with media when full open and full closed, this will not cause the erosion of sealing surface when medium pass.

One piece ball valve (1PC ball valve)
Design:ISO,API,GB,BS
Technology: Casting
Material:304,316,WCB,1000WOG
Connection type: Female threaded

Size: 3/8"-2"
Suitable medium: water, oil, steam
Suitable temperature: -40+150°C
Working pressure: PN10-PN64
Main material: 304, 316, WCB.
Design and manufacture adoption: ISO, API, GB, BS, we are strict with the security and quality ,it was accepted by clients and sells to internal, external market.

Serial number  Part name  Material

1 Seal and enclose  Polytetrafluoroethylene (PTFE) PTFE
2 Spheroid  Stainless steel SS316
3 Sealed cushion  Polytetrafluoroethylene (PTFE) PTFE
4 The valve covering  Stainless steel SS316
5 The valve has body Stainless steel CF8M
6 Valve stem  Stainless steel SS316
7 Stop pushing the washer  Polytetrafluoroethylene (PTFE) PTFE
8 Packing  Polytetrafluoroethylene (PTFE) PTFE
9 The packing pressing and covering on the nut  Stainless steel SS304
10 Washer  Stainless steel SS304
11 Valve stem nut  Stainless steel SS304
12 Handle set  Plastics
13 Handle  Stainless steel SS304

Our Advantage:We promise no leakage and breakage for valves. Every butterfly valve will test for 2 times test pressure before leave factory. We will replace the valve if there is quality problem within 24 months guarantee period.

2.We obtained ISO9001 quality system certification.We inspect the parts of valve carefully, 48 produce steps, try to supply you ideal valve.

3.We can supply different kinds of materials according to customers' requests,such as DI,cast steel,SS304,SS316 body and disc. EPDM,NBR,PTFE,Viton etc. Enough stock ensure fast delivery.

4.We have more than 150 types body moulds, which include ISO,DIN,ANSI,BS standard.

5.We own full-automatic machine paint line, match high-temperature baking house,which makes smooth paint and good appearance of valve.

6.Every Jinerjian valve has the one but only security label. Please browse http://www.8612315.com/.  months guarantee period.

7.Design-cast-machining-assemble-sale-after sale service.Perfect production and service,efficient and professional sales team,what we sale is not products, but solution for you!

Quality And Service Commitment:We regards"high quality products and customer satisfaction"as belief,regards "reasonable price, attentive service and most reliable quality"as basic of company. We make the following commitments to you.

A, Quality commitment:

1,In order to prevent unqualified products leaving factory,company carried out 48 ways quality controlfrom casting to packing.Each butterfly valve meets national standard.

2, We put inspection certificates and installation instructions together with products to help the finally user use correctly.

B,Price commitment:

1, In order to make sure reliability and advanced quality of the products, we choose the best material from parts suppliers.

2.We will supply our favorable price to you in the same conditions of other companies without use inferior materials.

C, Pre-sale service commitment:

Product introduction, technical communication, non-standard product design, trouble-shooting.

D, Sale service commitment:

1, we willinform customer about the product name,quantity,packing and delivery time in advance by fax,SMS,email etc,keep in touch with clients,ensure the timely delivery.

2, For special or complex products, we will arrange technical personnel give training and guidance to the usersabout application of the products, troubleshooting, commissioning and maintenance.

E, After-sales service commitment:

1, There are 24 months warranty of our products from the date of original delivery, "three guarantees" service (return, replacement, warranty).

2, During using products,we will organize regular technology, quality inspection and service personnel, collect the feedbacks about product quality, use condition and improvement etc, so as to further improve the quality of products.

              3, About users' complaints, we will make a constant respond. As for the problem which need to handle at the scene, after-sales service will arrived in 24 hours, 48 hours for outside province. At the same time need the customers fill out the product quality feedback form, after-sales service assessment form, so as to improve the quality of products and services.

"19 years trials and hardships

19 years persevere

We always believe that

What we manufacture is not only valve

Butcreating a faith, a trust, a quality

Even creating the Jinerjin brand which will be used all over the world in future.