Brand:aa
Product detail:
telescopic hydraulic jack for trailers
TG-type telescopic cylinder
Model | suitable truck length | Working Pressure | Max.Rod Diameter | Max.Stroke | Lifting Capacity |
FC129-3E-3880 | 5.2 | 19Mpa | 129 | 3880 | 20 |
FC129-4E-4280 | 5.2 | 19Mpa | 129 | 4280 | 20 |
FC149-3E-3880 | 5.2 | 19Mpa | 149 | 3880 | 25 |
FC149-3E-4280 | 5.6 | 19Mpa | 149 | 4280 | 25 |
FC149-4E-3880 | 5.2 | 19Mpa | 149 | 3880 | 25 |
FC149-4E-4280 | 5.6 | 19Mpa | 149 | 4280 | 25 |
FC149-4E-5180 | 6.2-6.5 | 19Mpa | 149 | 5180 | 25 |
FC160-4E-4280 | 5.6 | 19Mpa | 160 | 4280 | 25 |
FC160-4E-4640 | 5.6-6 | 19Mpa | 160 | 4640 | 30 |
FC169-4E-4280 | 5.2-5.6 | 19Mpa | 169 | 4280 | 30 |
FC169-4E-4640 | 5.6-6.1 | 19Mpa | 169 | 4640 | 32 |
FC169-4E-5000 | 6.2-6.8 | 19Mpa | 169 | 5000 | 32 |
FC169-4E-5180 | 6.2-6.9 | 19Mpa | 169 | 5180 | 32 |
FC169-4E-5390 | 6.2-6.9 | 19Mpa | 169 | 5390 | 35 |
FC169-4E-5460 | 6.5-7.3 | 19Mpa | 169 | 5460 | 35 |
FC185-4E-4280 | 5.6 | 19Mpa | 185 | 4280 | 25 |
FC185-4E-4640 | 5.6-6.1 | 19Mpa | 185 | 4640 | 30 |
FC185-4E-5000 | 6.2-6.5 | 19Mpa | 185 | 5000 | 32 |
FC185-4E-5390 | 6.2-6.8 | 19Mpa | 185 | 5390 | 40 |
FC185-4E-5460 | 6.5-7.3 | 19Mpa | 185 | 5460 | 40 |
FC185-4E-5780 | 6.9-7.7 | 19Mpa | 185 | 5780 | 45 |
FC185-4E-6000 | 7.3-8.2 | 19Mpa | 185 | 6000 | 50 |
FC191-5E-5460 | 6.5-7.3 | 19Mpa | 191 | 5460 | 35 |
FC191-5E-5780 | 6.9-7.7 | 19Mpa | 191 | 5780 | 40 |
FC191-5E-6200 | 7.3-8.2 | 19Mpa | 191 | 6200 | 45 |
FC191-5E-7130 | 7.8-8.5 | 19Mpa | 191 | 7130 | 50 |
FC220-5E-7130 | 7.8-8.5 | 19Mpa | 220 | 7130 | 65 |
FC220-5E-9030 | 10.-11. | 19Mpa | 220 | 9030 | 65 |
Feature:
1.short mounting distance, long stroke. easy to install.
2.adopt new technology, special material, unique key inside structure.
3.long service lifte.
4.make complete dump-truck hydraulic system
Application range:
This cylinders are mainly used in trucks and trailers, for lifting different tonnages of truck body.
We also can design new type cylinder according to your requirements.
Feature:
1. light weight, high strenght
Base on the nature of construction work, the hydraulic cylinders need to suit for high strength, high using frequency, high fatigability. To promise the stability and reliability of application.
2. The seal system
select the excellent seal kits from Japan and Germany. Adopt the advanced physical design, make sure the hydraulic cylinder get the best piston rod oil film.
3.cylinder body
adopt the good quality alloy honed tube, though cold-drawing and rolling, to reach an excellent roughness and surface hardness, improve the wear-resistance.
4.piston rod
middle frequency induction hardening and tempering, chrome plated on rod surface to improve the anti-rust, wear-resistance and anti-scratch property.
5.safety/cushioning function
the inside of cylinder set up an cushioning device in the end of stroke, it can absorb the huge