Trailer Mounted Pump equipped Diesel Engine

Brand:aa

Product detail:

    Welcome to Zhejiang lanco

P Series Self priming centrifugal trash pump

 

          P&H Series waste water pumps are designed for economical & trouble-free operation in handling solids-laden liquids and slurries. Pumps feature a large volute design which allows them to re-prime automatically in a completely open system without the need of suction or discharge check valves. And this is workable with the pump only partially filled with liquid and completely dry suction line.

           

           Pumps will be able to handle up to 75mm spherical solids, depending on pump models. In case that pump shaft or bearings need service or repair, the entire rotating assembly can be removed without disturbing pump casing or pipelines. Rotating assembly is sealed with an O-Ring, allowing for external adjustments of clearance. Material:  Cast Iron,  ADI,  CD4MCU,  316 SS,  Alloy 20,  C276. 

 

Data Sheet:

 

Type: P-2

Inlet, outlet:  2"

Max. throught solids: 44.45mm

Head: 5m ~ 36m

Flow:10m³/h ~40m³/h

Speed:1150rpm ~2900rpm

Repriming lifts: 7.3m ~7.6m

 

Type: P-3

Inlet, outlet:  3"

Max. throught solids: 63.5mm

Head: 4m ~ 35m

Flow:10m³/h ~100m³/h

Speed:650rpm~ 2150rpm

Repriming lifts: 1.5m~ 7.6m

 

Type: P-4

Inlet, outlet:  4"

Max. throught solids: 76.2mm

Head: 4m ~ 35m

Flow:20m³/h ~150m³/h

Speed:650rpm~ 1950rpm

Repriming lifts: 1.5m~ 7.6m

 

Type: P-6

Inlet, outlet:  6"

Max. throught solids: 76.2mm

Head: 4m ~ 30m

Flow:20m³/h ~300m³/h

Speed:650rpm~ 1550rpm

Repriming lifts: 2.4m~ 7.6m

 

Type: P-8

Inlet, outlet:  8"

Max. throught solids: 76.2mm

Head: 5m ~ 30m

Flow:50m³/h ~550m³/h

Speed:650rpm~ 1350rpm

Repriming lifts: 2.7m~ 7.0m

 

Type: P-10

Inlet, outlet:  10"

Max. throught solids: 76.2mm

Head: 5m ~ 35m

Flow:100m³/h~ 700m³/h

Speed:650rpm ~1450rpm

Repriming lifts: 2.1m~ 6.7m

 

Type: P-12

Inlet, outlet: 12"

Max. throught solids: 76.2mm

Head: 5m ~ 40m

Flow:150m³/h ~1100m³/h

Speed:650rpm ~1250rpm

Repriming lifts: 1.6m~ 4.9m

 

Type: H-3

Inlet, outlet: 3"

Max. throught solids: 20.63mm

Head: 10m ~ 60m

Flow:10m³/h ~80m³/h

Speed:850rpm~ 2150rpm

Repriming lifts: 2.3m ~7.6m

 

Type: H-4

Inlet, outlet: 4"

Max. throught solids: 28.57mm

Head: 10m ~ 60m

Flow:20m³/h ~140m³/h

Speed:850rpm~ 2150rpm

Repriming lifts: 2.4m~ 5.2m

 

Type: H-6

Inlet, outlet: 6"

Max. throught solids: 31.75mm

Head: 10m ~ 60m

Flow:40m³/h ~280m³/h

Speed:850rpm~ 1950rpm

Repriming lifts: 2.4m~ 4.5m

 

MODEL	Diameter size	R.P.M. R/MIN	MAX FLOW m3/H	TOTAL HEAD m	MOTOR HP	NET WEIGHT kg	GROSS WEIGHT kg	MAX SOLIDS mm
P-2	2 inch	1150-2900	46	36	1 – 10 HP	92	114	44.45
P-3	3 inch	650-2150	107	35	1 – 20 HP	183	205	63.5
P-4	4 inch	650-1950	163	36	1 – 30 HP	259.5	280	76.2
P-6	6 inch	650-1550	330	33	2 – 40 HP	364	391	76.2
P-8	8 inch	650-1350	600	34	7.5 – 75 HP	581	634	76.2
P-10	10 inch	650-1450	775	40	10 – 100 HP	635	663	76.2
P-12	12 inch	650-1250	1275	42	20 – 125 HP	998	1066	76.2
H-3	3 inch	850-2150	85	62	1.5 – 25 HP	214	225	20.63
H-4	4 inch	850-2150	148	58	3 – 40 HP	272	297	28.57
H-6	6 inch	850-1950	308	57	5 – 75 HP	413	437	31.75