cement silo precipator(Air volume 1500-2100m3)

Brand:aa

Product detail:

cement silo use dust collector (Air volume 1500-2100m3)   

 

DMC pulse jet dust collector is combosed by filter room, filter bag, air cleaning room, hopper, flap valve, pulse jet device, system blower, control panel, ect.

 

Work principle:

 

The dust air will enter the filter room from the hopper or the down open type flange, the coarse dust granule will fall into the hopper or silo, the fine dust will rise to the filter bag, after the filtering of the filter bag, the dust will stick to the surface of the filter bag, the cleaned air will come into the cleaning room from the bag mouth, and then come to the atmosphere by the system blower.

As the non-stop filtering, the dust stick to the filter bag accumulated continuously, cause the equipment resistance up to one designed value (generally is 1200Pa), Time Relay or Micro Pressure Controller will output the signal, make the controller start to work, consequently open the pulse valves make the compressed air sprayed into the filter bag via the spray tube rapidly and immediately, the rapid reverse air flow will make the filter bag expand suddenly, the sticked dust will fall off and down to the hopper or silo. Lastly, the dust will be discharged out by the flap valve or conveyer.

When in the reverse spray cleaning process, will spray the filter bag row by row gradually, when one in work, the others are in the filtering process.

 

DMC-32 Pulse jet dust collector

 

Technicals:

Design air volume:  1500-2100m3/h

Filter resistance: 1470~ 1770Pa

Filter rate: 1.0-1.5m/min

Filter area: 24m2                          

Inlet concentration: <200g/Nm3    

Outlet concentration: <30mg/Nm3

Dust temp.: ≤120°C

Compressed air pressure: 0.4-0.6Mpa

 

Configuration sheet: