Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Oil yield of the Waste tyre refining fuel oil machine
Raw material | Big tyres | Car tyres | Bicycles & motorcycle tyres |
Oil yield | 45%-50% | 40% | 30%-35% |
Steel wire | 15%-20% | 10%-15% | 5%-10% |
Carbon black | 30% | 45% | 45% |
Waste gas | 5%-10% | 5%-10% | 5%-10% |
* The specific rate subjects to the raw materials used. Please contact us for details. | |||
Waste tyre refining fuel oil machine
>> Features
* Safety
With an auto welding machine for the reactor, it can not only greatly improve working efficiency
but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak.
Professional heating treatment and x-ray detection chamber are especially for welding.
Vacuum system will prevent oil gas from going back to reactor and causing accident
Professional thermometer, pressure gauge and safety valve.
It is dangerous to burn exhaust gas (C1 to C4) without any safety measures. In our process, it is
transferred first through the safety device and a safety burning air muzzle. Before burning, we
should ensure the safety of production.
* Environmental protection
Well water dedusting system can avoid black smoke.
The exhaust gas will be recycled for heating reactor, no gas pollution
Every junction of the reactor is in good sealing situation with professional sealing material.
* Long service life
Material: Q245R/345R special steel plate, thickness 14-16mm
Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.
The service life of the reactor will be 5-6 years
* Energy saving
Well sealing for heating system, no gas leak and saving fuel.
The exhaust gas will be recycled for reactor heating.
2. Main characteristic of the Waste tyre refining fuel oil machine
a. In its key installment decomposition processor design, has thoroughly overcome the disadvantages of the domestic present vertical flat base split processor, such as bottom partial being heated non-uniformity, easy to break, low output, short service-life is short and so on, the main engine uses horizontal-type 360ostructure-0.4 R/M
b. Fast practical feed-in and discharge system. The highest feed-in quantity of the XY-5 every 24 hour achieved 5 tons, Discharge time for 300kg carbon black only needs 90 minutes. The highest feed-in amount of the integral unit equipment every 24 hours achieves 15 tons.
c. Flue dust catcher system. It matches the bidirectional water impact type tornado dust removal room, and the rate of the flue dust catch is access than 95% .
d. Highly effectively gas heating system. In the process of refining oil, after the gas is heated up to 150 , it will produce a large amount of unliquefied gas-CH4& C4H8 , which cant be formed at normal temperature, normal pressure. If those gases have been fully burning by the specific designed gas nozzle, they can produce a great amount of energy and economize resources. Take the bunker coal as the example, when there is no fuel gas as combustion-supporting for the equipment, every 24 hours need 1.2 tons coals. After the fuel gas aid combustion, every 24 hour need 0.3 tons coal, which enhances production efficiency in the large scale and reduced the fuel cost?
Waste tyre refining fuel oil machine
| Items | Contents | ||
1 | Equipment type | XD-06 | XD-08 | XD-10 |
2 | Raw material | tires/Plastic/rubber | tires/Plastic/rubbrt | tires/Plastic/rubber |
3 | Structural form | Horizontal rotation | Horizontal rotation | Horizontal rotation |
4 | 24-hour Capacity | 6 tons | 8 tons | 10 tons |
5 | Oil yield | 2.7~3 tons | 3.6~4 tons | 4.5~5 tons |
6 | Operating pressure | Normal | Normal | Normal |
7 | Material of reactor | Q345R/Q245R steel boiler plate |
Q345R/Q245R steel boiler plate
|
Q345R/Q245R steel boiler plate
|
8 | Thickness of reactor | 14mm/16mm | 14mm/16mm | 14mm/16mm |
9 | Rotate speed of reactor | 0.8turn/minute | 0.8turn/minute | 0.8turn/minute |
10 | Total power | 20KW | 20KW | 20KW |
11 | Mode of cooling | Water cooling | Water cooling | Water cooling |
12 | Kind of transmission | Internal gear drive | Internal gear drive | Internal gear drive |
13 | Noise | ≤85 | ≤85 | ≤85 |
14 | Size of Reactor(D×L) | 2000×6000 | 2200×6600 | 2600×6600 |
15 | Working form | Intermittent operation | Intermittent operation | Intermittent operation |
16 | Delivery time | 20days | 20days | 20days |
17 | Weight | 18~22T | 20~25T | 25~30T |
Working process:
1.Waste plastic refining flow: Plastic separation—automatic feed---catalytis cracking---oil-water separation---cooling liquid---crude oil----flammable gas recovery---flammable gas combustion----desufuration and dust removal
2.Waste tires refiningflow: Tire broken---automatic feed---catalytic cracking---oil-water separation---cooling liquid---carbon black emission---carbon black processing---crude oil---flammable gas recovery---fammable gas combustion---desulfuration removal
