Textile printing silicone ink for lable

Brand:aa

Product detail:

 

Characteristic:

 

1.      Fine heat resistance and resistance to oil, solvent, and other chemical etc. Ironing or dry cleaning won’t lead to damage to silicone surface.

2.       The printing surface is velvet, soft and flexible, as well as excellent recovery capacity.

3.       Fine flexibility and high tear strength.

4.       Curing time can be adjusted by the relief of curing agent and curing temperature.

5.      After blending the curing agents, the pot life will be prolonged, which could decrease the loss of ink. So the operating capacity is fine.

6.      Could well adhere with polyester fiber and nylon cloth, which could be applied to flexible swimming
clothes and other cloths that need high flexibility.

7. Could adjust the fluidity. If delete the fluidity, limitless printing surfaces could be piled. Let the edge
of the printing face be a right-angle, which could not only improve printing brilliance, but also
conveniently adjust the printing operation after the fluidity is adjusted well.

  

methods:

 

1.      Mixed Color master batch: Using it when needing various colors. Adding 0.2% of total amount material.

2.      Mixed 10% CATATLYST curing agent into small amount of silicone ink(90%).

3.      The curing agent should be mixed very well, Otherwise,some parts won’t be cured.

could use thinner for decrease the viscosity,over 15% of thinner, the abrasiveness, durability and adhesion force will be reduce. There tested before production is required.

 

Silicone gel Ink for Caviar press Print textile

Caviar transfer printing

Heat press at 180 c, for 10 sec, medium pressure

 

 Any question ,please feel free to contact MS Betty Xu