Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Brief Introduction of Liquid Silicone Rubber
Liquid Silicone Rubber is a two component material,and it consist of Part A base silicone and Part B curing agent.When the two parts mix together and pour or brush on a object,the silicone base and curing agent can cure to be a silicone mold at room temperature;and the silicone mold can be released from the object after curing,and then the silicone mold can be poured into the following material to copy: plaster,polyurethane, PU, GRC, cement, resin, polyester, wax etc...
Specifications of MC Liquid Silicone Rubber
Equipped with REACH certificate
Professional technician with rich experience
4% catalyst is offered for free of charge
Silicone range:10-60 shore A
High duplicating silicone molds(500-600)
Main Characteristics of Liquid Silicone Rubber
Good flowability for better operation
Medium hardness for better duplication
High tearing and tensile strength
Low shrinkage
Extensive Applications of Liquid Silicone Rubber
Liquid silicone rubber can be applied in many objects mold making, since the liquid silicone has good flow ability and medium hardness, and the silicone can cure at room temperature, thus it's a good material for duplication.
Liquid Silicone rubber can be used for artificial stone moldmaking.For example RTV2030,RTV2066 and RTV2088 silicone .
Liquid Silicone rubber can be appliied in candle and soap moldmaking, such as RTV215 and RTV218 silicone
Liquid Silicone rubber can be used for plaster moldmaking, such as RTV2025,RTV2028 and RTV2030 silicone
Liquid Silicone rubber can be applied in the field of shoe sole moldmaking, for example, RTV3010 and RTV3015 silicone .
Liquid Silicone rubber can be used for prototyping and electronic potting.
Liquid Silicone Rubber can be used in the duplication of cement molds, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. Etc.
One Datasheet of Liquid Silicone Rubber
| Item | RTV 1040 |
| Color | clear |
| Curing agent | CA30 |
| Mixing ratio | 100:10 |
| Mixed viscosity | 85000~90000 cps |
| Working time | 60 mins |
| Curing time | 12 Hours |
| Hardness | 40 Shore A |
| Tear Strength | 27 N/mm |
| Tensile Strength | 6 Mpa |
| Shrinkage | ≤0.1% |
| Elongation at break | 360% |
| Relative density | 1.1 g/cm3 |
FOQ of RTV-2 Silicone Rubber for Mold Making
Why does the RTV liquid silicone rubber for molding have few mold making times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
The information above is just for reference, if you're interested or have any questions, please feel free to contact Nicole:
E-mail:nicole(at)mcsilicone(dot)com
Skype:nicoleszmc
MSN: nicoleszmc (at)hotmail(dot)com
