RTV molding silicon for gypsum decoration

Brand:aa

Product detail:

                      RTV molding silicon for gypsum decoration in hot selling 

 

Applications of RTV molding silicon

 

1. RTV molding silicon can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry

 

2. RTV molding silicon  is applicable for  large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold

 

3.  RTV molding silicon is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

 

 

Features of RTV molding silicon for gypsum decoration:

 

1.Two-part silicon rubber:flowable liquid silicon and curing agent.
2.Cures at room temperature within 6-8 hours.
3.An exceptional fluidity and good operability, easy to demold.
4.Good tensile and tear strength, low shrinkage.
5.High duplication times

 

 

TDS of RTV molding silicon for gypsum decoration  

 

Item No.	RTV 2030
Color	white
Curing agent	CA30
Mixing ratio	100:2
Mixed viscosity	26000 cps
Pot life	30-40 Minutes
Curing time	4-6 Hours
Hardness	30 Shore A
Tear Strength	26 N/mm
Tensile Strength	≥3.8 Mpa
Shrinkage	0.3%
Elongation at break	500%

 

How to make the silicone mold?

 

1. Preparing

The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

 

2. Mixing Process

Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100:2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35°C (95°F).it’s suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.

Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

 

3. Pouring the mixture and curing

Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.

 

STORAGE

 

When the silicone rubber is stored at or below 30 °C (85 °F) in the original unopened containers, RTV2 Silicone Base and CA30 Curing agent have a usable life of 10 months from the date of production. After 10 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

 

 

Package of RTV-2 molding silicone rubber

 

 

Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 800g/bottle, 1kg/bottle and 10kg/bottle

 

Professional factory of RTV-2 Molding Silicone :

 

We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.

 

 

 

Should you have any question, please feel free to contact Ms Julie.

 
Skype:  julieszmc

 

MSN: julieszmc(at)hotmail(dot)com

 

MINGCHENG GROUP LIMITED