Click for original picture
Legal status confirmed
Brand:aa
Product detail:
General Description of rtv-2 silicon for stone molding:
Liquid RTV-2 Silicone Rubber is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 4-6 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. And fabrication of precision molds.
Features of rtv-2 silicon for stone molding:
Liquid RTV-2 silicone rubber is a flowing liquid with general hardness of 5-40 shore A, after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
| Item No. | RTV2030 |
| Color | white |
| Curing agent | CA30 |
| Mixing ratio | 100:2 |
| Mixed viscosity | 26000 cps |
| Pot life | 30-40 Minutes |
| Curing time | 4-6 Hours |
| Hardness | 28-30 Shore A |
| Tear Strength | 30 N/mm |
| Tensile Strength | 3.8 MPA |
| Relative density | 1.15 g/cm³ |
| Elongation at break | 480% |
| Methods of molding | Pouring |
Application of rtv-2 silicon for stone molding
A: Cultural relic duplication, architectural decoration, statues
B: Polyester Resin crafts
C: Lighting ornaments, soap, candles molding
D: Plaster, Gypsum, Cement, Concrete decorations
F: Model design, product exploitation, etc.
Instructions of rtv-2 silicon for stone molding:
1-Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
2-vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available
3-Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and evenly pour into the mixed silicon rubber into the square frame. After the cross linking reaction.
Storage and Precautions of rtv-2 silicon for stone molding:
Liquid RTV2 Silicone Rubber is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Should you have any question, please feel free to contact Ms Julie.
Skype: julieszmc
MSN: julieszmc(at)hotmail(dot)com
MINGCHENG GROUP LIMITED
