RTV2 Silicone Rubber for Skin Casting

Brand:aa

Product detail:

Specifications of RTV2 Silicone Rubber for Skin Casting  

 

1. Platinum (PT) cure, good resilience

 

2. Non-toxicity, human skin color

 

3. Good tear strength and elongation

 

Applications of RTV2 Silicone Rubber for Skin Casting 

 

RTV2 Silicone Rubber for Skin Casting is suitable for human skin model made, Life casting, Masters, Prototypes, Decorative Component, Architectural Models, etc.

  

Datasheet of  RTV2 Silicone Rubber for Skin Casting  

  

Item No.	SK5	SK0
Color	liquid white	liquid white
Curing agent	CA30	CA30
Mixing ratio	100:2	100:2
Mixed viscosity	9000-25000 cps	4500-6000 cps
Pot life	8-10 Minutes	0-1 Minutes
Curing time	4-6 Hours	4-6 Hours
Hardness	5-10 Shore A	0-1 Shore A
Tear Strength	20 N/mm	20 N/mm
Tensile Strength	2.5 MPA	≥2.5Mpa
Shrinkage	0.3%	0.3%
Elongation at break	650%	750%
Methods of molding	Pouring	Pouring

 

Note: You can add the pigment to adjust the color of the silicone appearance.

 

Instructions for Making Silicone Rubber Molds

 

1. Make sure the surface of the original is clean and free of loose material. 

2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.

3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage.

4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base. 

5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original

6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.

Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

 

Storage of  RTV2 Silicone Rubber for Skin Casting 

 

When the RTV2 silicone rubber is stored at or below 30 °C (85°F) in the original unopened containers, RTV SK0/SK5 silicone base and CA30 curing agent have a usable life of 9 months from the date of production.

 

  

The information above is just for reference, if you're interested or have any questions, please feel free to contact Nicole:

Web:www(dot)mcsilicone(dot)com

E-mail:nicole(at)mcsilicone(dot)com

Skype:nicoleszmc

MSN: nicoleszmc (at)hotmail(dot)com