RTV II Silicones for mold making

Brand:aa

Product detail:

 

Description of RTV II Silicones for mold making    

 

RTV-2 Silicon is generally named as two-part room temperature cure silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2% curing agent, they can still be operated within 30 minutes, but will be formed after 4-6 hours. With resistance to deformation, high temperature, acid and alkali, and expansion. 

 

Features of RTV II Silicones for mold making 

 

1-  Silicone Rubber has an exceptional fluidity and good operability.
2-  Silicone Rubber has good Temperature and deformation resistance as well as low shrinkage.
3-  Silicone Rubber has High duplication times.

 

RTV-2 Silicone For Mold Making

 

RTV2015	white	15 shore A	small and detailed mold	pouring way	for PU, resin, concrete, plaster, cement stone, gypsum decorations, statue mold, architecture decorative items, etc.
RTV2020	white	20 shore A	small or middle sized
RTV2025	white/translucent	25 shore A	middle sized
RTV2030	white	28-30 shore A	big size mold
RTV2024	white/translucent	24 shore A	small or middle sized
RTV2028	white	27-28 shore A	middle sized or big mold	pouring/brush
RTV2038	white	35-38 shore A	large mold	pouring way
RTV920	white	18-20 shore A	small or middle sized
RTV930	white	28-30 shore A	big size mold

 

Storage of RTV II Silicones for mold making  

 

When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, RTV2 Silicone Base and CA30 Curing agent have a usable life of 10 months from the date of production. After 10 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

 

 

 

Note

 

RTV-2 Silicon is an industrial product and must not be used in food molding, dental human skin molding applications.

 

Package

Part A base silicone:  25kg/drum or 200kg/drum

Part B CA30 Curing Agent: 800g/bottle

   

    

The information above is just for reference, if you're interesting or have any questions, please don't hesitate to contact Berry:

 

 

E-mail: berry(at)mcsilicone(dot)com

 

Skype:berryszmc

MSN: berryszmc(at)hotmail(dot)com