Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Best on sale remote control switch YET404PC
Product description:
Four way intelligent receive controller have four way output , each way 's output controlled by relay control the equipment to realize turn , turn over , switch on/off/change or kinds of special control program requirements. It outputs include self-lock, non-lock, inter lock and self-lock/inter lock coexist, micro controller programming control.
It is a full set of wireless intelligent remote control system widely used in electric doors, windows, lifting equipment, gateways, lifting devices, industrial control, industry security and other fields....
1. Brief introduction
Our factory design and produce the four circuit wireless intellect receiving control what can provide switch signal to the four relays, so it can meet many requirements such as: control motor’s TcorotationT and reversal, the connection and lock of the switch and other special control programs. This kind of wireless intellect receiving control main apply to auto door, curtain, lifting appliance, gate way, lifter, industrial control and security line
This kind of wireless receiving control is high confidentiality, large memory space, stable characteristics, low power consume and very convenience, it is unnecessary adopt the traditional wire jumper or dip switch code but only receive and store the wireless signal from the remote control, and The lost learnt control can not work if you delete the memory message of the receiving control, however it could learning again by the owner if want to obtain the right of use. There are four kind of output ways- Signal self-locking, Signal interlock , Signal inching and 2 self-locking,2 inching.
2. The way of output
lSignal self-locking---1 connect 2 disconnect
lSignal interlock——2.connect 1 disconnect
lSignal inching ---1,2 disconnect
l2 self-locking,2 inching——1,2 connect
(check the Circuit diagram for details)
3. Learning way and steps
1. Press learning key of receiver-indicate enter into the status of learning as you hear the sounds of buzzer.
2. Press any button of the remote control-indicate learning success as you hear the sounds of buzzer.
4. Delete memory message
Press the learning button of the receiving module about 7 second until the LED light is extinguished, which indict success to delete the memory message.
5. Main Technique Data
Working voltage | DC12V/ 24V(optional) |
Static working current | ≤7mA |
Working temperature | -40°C - +80°C |
Receiving sensitive | ≥-105dBm |
Working frequency | 315MHz,433MHz |
Output voltage | alternating current or direct current |
Output current | ≤10A |
Size | 74.5mm*54.5mm*27.5mm |
6. Circuit diagram for your reference
