Liquid Rubber plaster mold silicon

Brand:aa

Product detail:

 

Description of Liquid Rubber plaster mold silicon 

 

Condensation molding Silicone is generally named as two-part room temperature cure silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2% curing agent, they can still be operated within 30 minutes, but will be formed after 4-6 hours. With resistance to deformation, high temperature, acid and alkali, and expansion. 

 

Features of Liquid Rubber plaster mold silicon 

 

1-  Condensation molding Silicone has an exceptional fluidity and good operability.
2-  Condensation molding Silicone has good Temperature and deformation resistance as well as low shrinkage.
3-  Condensation molding Silicone has High duplication times.

 

Condensation molding silicone 28 shore A

 

Item No.	RTV2028
Color	white
Curing agent	CA30
Mixing ratio	100:2 100:3 100:5
Mixed viscosity	30000 cps
Working time	30-40 Minutes
Curing time	4-6  Hours
Hardness	28 Shore A
Tear Strength	30 N/mm
Tensile Strength	4.5 MPA
Shrinkage	≤0.3%
Elongation at break	511%

 

 

Storage of Liquid Rubber plaster mold silicon  

  

When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, RTV2 Silicone Base and CA30 Curing agent have a usable life of 10 months from the date of production. After 10 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

 

  

 

Note

 

RTV-2 Silicon is an industrial product and must not be used in food molding, dental human skin molding applications.

 

Package

Part A base silicone:  25kg/drum or 200kg/drum

Part B CA30 Curing Agent: 800g/bottle

   

    

The information above is just for reference, if you're interesting or have any questions, please don't hesitate to contact Berry:

 

 

E-mail: berry(at)mcsilicone(dot)com

 

Skype:berryszmc

MSN: berryszmc(at)hotmail(dot)com