Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Introduction of Molding Condensation Cure Silicone Rubber
Molding Condensation Cure Silicone Rubber is a two-component material, this kind of silicone rubber consists of Part A base silicone and Part B CA30 curing agent, and Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone molds: plaster polyurethane, PU, GRC, cement, resin, polyester, wax etc...
Specifications of MC RTV-2 Silicone Rubber
Equiped with REACH certificate
Professional technician with rich experience
4% catalyst is offered for free of charge
Silicone range:10-60 shore A
High duplicating silicone molds
Applications of Molding Condensation Cure Silicone Rubber
Molding Condensation Cure Silicone Rubber can be applied in the field of reproducing cement molding, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. Etc.
Technical datasheet of Molding Condensation Cure Silicone Rubber
Base and Curing Agent Mixture (100:2 by weight) in 25 °C (77F) testing
Item | RTV2030 |
Color | Liquid white |
Curing agent | CA30 |
Mixing ratio | 100:2 |
Mixed viscosity | 24000-25000 cps |
Working time | 30-40 Minutes |
Curing time | 4-6 Hours |
Hardness | 28-30 Shore A |
Tear Strength | 30 N/mm |
Tensile Strength | 3.8 MPA |
Relative density | 1.15 g/mm³ |
Elongation at break | 480 % |
