Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Main Products:
Silicone rubber RTV 2 for brush,silicone rubber for art mold, rubber pad head,liquid silicone rubber LSR, silicone oil, condesastion silicon rubber RTV, addition silicone RTV, silicone Ink , Lifecasting silicone gel, silicone rubber for electronics parts.
Addition silicone rubber is mainly be used as following:
Vacuum casting Rapid prototyping
Electrical application by encapsultion or filling
Mould making
For making printing pads.
Mold for Urethane (polyurethane) Polyester casting resin ,expoxy resin, Low melt metals (mold life can be short) Cement, Concrete epoxy Soap ,Wax ,rings, pendants, earrings, religous, bridal, bands, mens jewelry, cuffs, bracelets, charms, nautical, findings, customs, sports,
Product | Catalyzed Viscosity:cps | Base Color | Specific Gravity | Mixed Ratio | Shore A Hard | Tensile (Mpa) | Elongation % | Shrinkage % |
LH-30 | 40,000 | Translucent | 1.22 | 10A:1B | 28 | ≥3.6 | >420 | <0.1 |
LH-45 | 60,000 | Translucent | 1.22 | 10A:1B | 38 | ≥4.0 | >400 | <0.1 |
Safely molds just about anything without shrinkage
is a 0% shrinkage room temperature vulcanizing liquid rubber that lets you make molds of delicate objects that would not survive the heat and pressure of the normal vulcanization process. Typical uses include making molds of CAD-CAM, RP and SLA resin models, wax carvings and wax injections. Also possible are objects from nature — leaves, plants, flowers, fruit, insects – anything!
Easy to pour!
Lianhuan liquid silicone is an easy-flowing two-part liquid room temperature vulcanizing compound that makes tough, strong, flexible rubber molds in 18 hours at normal temperatures. It can be cured in as little as 90 minutes at temperatures up to 66° C./ 150° F.
Unlike traditional silicone liquid molding rubbers, Lianhuan liquid silicone is easy to pour, easy to mix and easy to vacuum de-bubble because of its low viscosity.
Costs Less!
Lianhuan liquid silicone produces superior molds but costs only a fraction of the price you may be accustomed to paying for traditional RTV compounds.
Stronger, tougher molds!
Molds made of Lianhuan liquid silicone are much stronger, tougher and longer lasting than those made fromtraditionalliquid rubbercompounds.Lianhuan liquid siliconemolds are production molds that can be used 100’s of times, not intermediary or prototype molds that can be used only once or twice
One step mold-making!
Lianhuan liquid silicone avoids the need to cast a delicate wax or resin model in silverand then make a traditional rubber mold from the casting, a process that can take several days and result in multiple levels of shrinkage and an inevitable loss of detail.
Easy to use!
Lianhuan liquid silicone is easy to use and requires no specialized equipment, making it ideal for those without a vulcanizer. It can even be used without a vacuum – merely coat the model with a brush dipped in Lianhuan liquid silicone and inspect it for bubbles before completing the pour. Any bubbles found can easily be pricked with a pin or similar tool. Models can also be dipped in Lianhuan liquid silicone and then inspected for bubbles.
Molds made of Lianhuan liquid siliconemolding rubber will last many years if stored properly. For best results store finished molds in airtight containers such as the kind sold for food storage.
Any more information, please feel free to contact Ms Nancy Xie
Tel: 0086-755-27052112
Fax: 0086-755-27052562
Mobile :( 86)13699849627
SKYPE: nancy xie2007
If any inquiry and doubt,please feel free to contact nancy xie(0086-755-27052112) mobile: 0086 13699849627
