NBSC Refractory silicon nitride tubes

Brand:aa

Product detail:

NBSC Refractory silicon nitride tubes 

 

Silicon Carbide Manufaturers/NBSC Refractory silicon nitride tubes:

 

NBSC Refractory are used by a range of customers in applications where heat and wear resistant materials are required.

Silicon nitride bonded silicon carbide products are chosen because of superior wear resistance, high strength, and the ability to handle elevated temperatures (to 1750 degrees C).

 

NBSC refractory is also resistant to attack by many chemicals and is not wet by most molten metals. In addition NBSC does not react with molten metals or their oxides.

 

Characteristic of NBSC Refractory silicon nitride tubes :

 

High strength

Low thermal expansion coefficient

Good thermal conductivity and thermal shock resistance

Excellent resistance to liquid aluminum erosion capability

High erosion resistance

 

Specifications of NBSC Refractory silicon nitride tubes :

 

SiC,% ≥	72
Si3N4,% ≥	20
Fe2O3,% ≤	0.7
Density (g.m-3) ≥	2.65
Apparent Porosity (%) ≤	14
Cold Crushing Strength(Mpa) ≥	150
Modulus of rupture strength (MPa) ≥ 1400°Cx0.5hrs	45
Refractoriness under load(°C)≥ 0.2Mpa,0.6%	1700

 

Applications of NBSC Refractory silicon nitride tubes include:

Ceramic kiln shelf,panels,pillars,seperated flame plate,Waste Incineration Furnace Lining,aluminum tank.

 

All products are produced to the highest quality standards which means the consistent supply of ceramic components to enable your process to run more efficiently.

All components are supplied with a replacement guarantee. This guarantee provides for the replacement of the component if the service life is reduced because of a fault in the manufacturing process.

 

Typically we offer a guarantee of 40 days life in service for a riser tube in a low pressure aluminum die casting application, depending on the design. Our experience has shown that the design of the riser tube has an effect on the operational life. We can call on our experience and advise on the design of components to ensure the longest possible life for ceramic parts in your equipment.

 

Complex shapes can be cast and fired to fine tolerances. The current product range includes riser tubes, thermocouple tubes, heater sheaths, hydrocyclone liners, impeller and pump casing assemblies, pipeliners, and burner nozzles.

 

Manufacture process of NBSC Refractory silicon nitride tubes :

 

a.) Choose metal silicon as raw material, add additives, then mix.

b.) Put the mixture into the mold, then make embryoid by machine pressing.  

c.) Be reaction sintered by nitrogen protection in electric furnace. 

Packing details of NBSC Refractory silicon nitride tubes  

a.) The finished silicon refractory bricks are packed in wooden cases, and the wooden cases are tied up by 6 steel belts, then the wooden cases are put on fumigation wooden pallet.

b.) We also pack products as custom request.

   

Delivery time:

 

30 days for 1×20GP CMB

 

Lab equipment:

 

 

....