gr5 titanium bars for medical astm f136

Brand:aa

Product detail:

GR5 titanium alloy bar  

Ti-6Al-4V is a two phase alpha + beta grade of titanium and is the most widely used of all the titanium grades. It is supplied in the annealed condition as per the AMS 4928R or BS2TA11for ease of machinability and can be strengthened with a relatively simple heat treatment to offer very high mechanical properties.

The combination of these good mechanical properties (maintained up to ~400^oC), a low density of 4.42 g/cm³ and a very good corrosion resistance make the Ti-6Al-4V ideal for applications in the aerospace, marine, offshore oil & gas and motorsport industries.

 

GR5 titanium alloy bar  Applications :

Offshore & Marine

Offshore tubulars and oil and gas equipment.

Aerospace

Compressor blades, discs and rings for jet engines, airframe components, fasteners, rocket engine cases, helicopter rotor hubs and critical forgings.

Other

Biomedical implants, and chemical processing equipment.

 

Nominal Composition

Ti Rem, Al 6%, V 4%, Fe 0.3% max

 

Key Features

1.Very High Strengh Capabilities

2.Good Corrosion Resistance

3.Excellent strength to weight ratio

4.High Strength at cryogenic temperatures.

5.Good Weldability  

 

 

specifications:

  ASTM F67 Medical  titanium bar

1) Chemical composition(WT%  Max)

Grade	N	C	H	Fe	O	Ti
Grade 1	0.03	0.08	0.015	0.20	0.18.	balanced
Grade 2	0.03	0.08	0.015	0.30	0.25	balanced
Grade 3	0.05	0.08	0.015	0.30	0.35	balanced
Grade 4	0.05	0.08	0.015	0.50	0.40	balanced

 

2) Properties

Grade	Tesile strength(Min) Ksi           Mpa		Yield strength 0.2%(Min) Ksi          Mpa		Elongation (Min)   %	Reduction of Area (Min)   %
Grade 1	35	240	25	170	24	30
Grade 2	50	345	40	275	20	30
Grade 3	65	450	55	380	18	30
Grade 4	80	550	70	483	15	25

 

Gr5 ELI  ASTM F136 Medical titanium bar 

Chemical composition(WT%  Max)