5 layers 316 SS wire filter disc (BV SGS Certification)

Brand:aa

Product detail:

5 layers 316 SS wire filter disc (BV SGS Certification)   

Stainless Steel  Filter Discs and Wire Mesh Discs are made of stainless steel woven wire mesh and wire cloth. 

 

Characterictics
.Wide range of filter rating 
It has the steady filter rating from the 1micron to 100micron.
.Steady filter rating
Due to the two protective layers, the mesh of the filter layer is not easy to deform.
.High mechanical strength 
Owing to the support of fourth and fifth layers, it has higher resistance to pressure and mechanical strength.
.Easy to wash
It is very easy to wash, especially to reverse wash, by virtue of adopting the surface layer filtration material
.Heat resistance
It can resist the heat up to the 480^oC.
.Corrosion resistance 
It has the property of anti-corrosion as a result of adopting the material of SUS316L. 
.Tractability

It suits for many kinds of machining, such as cutting, bending, punching, stretching, welding and so on.

Material

The standard materials are SUS304(AISI304),SUS316(AISI316),SUS316L(AISI316L). 
Special Alloy Steel Hastelloy ,Monel ,Inconel are acceptable base on customer's requirement .

Dimension

The standard dimensions are 500x1000mm,600x1200mm and 1000x1000mm,1200x1200mm, and other dimensions in between are also available.

 

  

Modal	Pore size μm	Bubble-point Pressure ≥Pa	Permeability (N2)		Porosity ≥%	Tensile Strength ≥MPa
			L/min cm2.pa	M3
SSW-003	3	11200	8.0×10-5	9.1×10-13	35	90
SSW-005	5	8800	1.0×10-4	2.2×10-12	35	100
SSW-010	10	3860	5.0×10-4	4.8×10-12	24	100
SSW-020	20	1970	1.0×10-3	1.5×10-11	24	100
SSW-030	30	1350	3.0×10-3	2.2×10-11	26	100
SSW-50	50	1030	5.0×10-3	4.0×10-11	33	110
SSW-80	80	520	7.0×10-3	1.1×10-10	32	110
SSW-100	100	410	8.0×10-3	1.9×10-10	32	110
SSW-150	150	280	1.0×10-2	3.6×10-10	37	110
SSW-300	300	130	5.0×10-2	5.8×10-10	37	110
Maximum dimension of plate (without joining) 1200mm×1200mm