DN65 Stainless steel oval gear flow meter

Brand:aa

Product detail:

Stainless steel over gear flow meter DN65

High accuracy
.12V DC
.Output:4-20mA  or  pulse
.Operate simply

Technical Data

( )nrmal cast iron type(A), Steel type(E),Stainless steel type

Type	A	E	B
Pressure(Mpa)	1.6	2.5,4.0,6.4	1.6
Temperature(°c)	-20~100	-20~100	-20~100
Viscosity(mpa.s)	2~200	2~200	2~200

• Diameter: 10~200mm
• Uniform rotator, small vibration, long working life.
• Typical Applications: Lubricating Oil, Epoxies, Fuels, storage tank flow meter, oil counter, tank truck flow meter
• Diameter:10~200mm
• High accuracy, wide range.
• Uniform rotator, small vibration, long working life.
• Low sensitivity to variance of viscosity, suitable applied in be high viscosity liquid.
• Simple instruction, small sizes, light weight,
• Simple installation, no need install straight pipe section before meter.
• Technology specification:
• Accuracy class:0.5%.0.2%(-10 º C~+60 º C)
• Medium temperature:-20 º C~80 º C, it can reach 200 º C with radiator
• Explosion-proof: ExiaIICT6
• Advantages: Given it's immunity to the most viscous of fluids, oval gear meter are ideally suited for measurement of viscous fluids or those with varying viscosities such as oils, syrups and fuels.
• Ease of installation is another advantage of the oval design. Because no straight pipe runs or flow conditioning are required, oval gear meters can be installed in tight areas where alternate technologies would fail
• Disadvantages: Oval-gear meters are generally not recommended for water or water-like fluids, because the increased risk of fluid slippage between the gears and chamber walls. Fluids should be clean and non-corrosive, preferably medium to high viscosity
• Typical Applications:

•Lubricating Oil

•Greases

•High Viscosity Fluids

•Epoxies

•Polyurethane

•Fuels

•Solvents

•Chemicals

•Additives