Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Our Factory
Sawdust Pellet Press Machine Introduction:
Wood ring die pellet mill
is applied to make the agro-forestry wastes into solid fuels or wood pellets. It includes an imperative feeder system, stainless screw conditioner, high quality gearbox, ring die and lubrication system. The material is transferred to the conditioner by a screw feeder, then the conditioner can make different materials fully mixed. The conditioner plays a key role in softening raw materials by utilizing water or steam. After softening, the raw material is sent by a feeder to the pelletizing chamber. By spinning rollers in the chamber force the material through the holes of the die, thus pellets are formed. After pelletizing, the length of the pellet can be cut according to different user's request.
Raw Materials as below :
Sawdust Pellet Press Machine Features:
1. Main drive adopts high accurate gear drive, with an output of about 20% higher than belt drive, and the die adopts the quick removing clamps.
2. The drive part of the machine including motor optimize the high quality SKF bearings made in Switzerland, which ensure high efficient and steady driving with low noise.
3. The imperative feeder device is adopted, which making the machine operate smoothly as the material like wood sawdust, corn, wheat, and rice straw is very light, so they are needed to be pushed into pelletizing chamber by force.
4. Full Stainless steel strengthening feed conditioner, adopts the frequency-conversion speed regulating control to guarantee quality wood pellet.
5. The alloy steel die is made by international advanced German gun drill and American vacuum furnace, has long service life and ensure smoothly pelletizing and high quality.
6. The international advanced compensation type flexible coupling is of novel and compact structure, safety, low noise and less trouble.
7. Permanent magnet device can remove impurities in the pelletizing process.
Wood Pellets Superiorities:
1. Efficient. Wood pellets are an efficient source of heat because they contain very low levels of moisture and ash, when compared to woodchips or cordwood. Virtually all of the material is burned and converted to heat.
2. Cost-effective. Wood pellets are economically competitive with home fossil fuel options and electric heat.
4. Environmental friendly. Wood pellets are a sustainable fuel source, and burning wood pellets is carbon neutral.
5. Renewable. Wood pellets are a biomass product made of wood waste or other forest-thinning byproducts. According to data collected by the Pellet Fuels Institute, wood pellets are an unlimited fuel source.
6. Broad application. Wood pellets can be used in a lot of appliances such as stoves, furnaces, boilers and other heating systems .
Sawdust Pellet Press Machine Technology Data:
Material: Wood chips, rice husk, sunflower seed shells and agricultural wastes.
Pellet size: 6mm, 8mm,9mm,10mm ,12mm
Capacity: 0.3-3.5T/H
Bamboos Sawdust Pellet Making Machine Specification
Pellet machine specification :
1. This pellet machine mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce φ6.0,φ8.0,φ10.0,φ12.0 pellets.
Bamboos Sawdust Pellet Making Machine Main Data
Specification |
|
|
|
| |
Model | MZLH32 | MZLH35 | MZLH40 | MZLH420 | MZLH508 |
Capacity (t/h) | 0.2--0.4 | 0.4--0.6 | 0.5--1.2 | 0.8--1.4 | 1.5--2.0 |
Main Power (kw) | 37 | 45/55 | 75/90 | 90/110 | 110/132/160 |
Force feeder power(kw) | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 |
Feeder power(kw) | 0.75 | 1.1 | 1.1 | 1.5 | 1.5 |
Diameter of Ring die(mm) | φ320 | φ350 | φ400 | φ420 | φ508 |
Wood pellets size (mm) | φ6.0,φ8.0,φ10.0,φ12.0 | ||||
Biomass Fuel Pellet Press Machine Photos
Spare parts Photos
Sawdust Pellet Press Mill Description
Technical Data:
This line can make the wood pellets with sawdust, it also can collet the material , mix and adjust the quality to make small and roundish pellets. The technological process is rational in succession. Every unit's performance is good. the aricrew cooperation is compact. The whole line take small area and has small energy consumption. It also can make pellets from all kinds of grain straws.
It mainly contains wood crush process, drying process, pellet making process, cooling process, packing process and waste air handing process, The final pellet has good quality and meet the europe standard.
The diameter of the pellets can be 2mm,4mm,6mm,8mm,12mm, the length can be adjusted according to the requirement of the client, for example 4cm,8cm,12cm
Wood Pellet Line Flow Chart
02
To know more, plz contact winni
Cell:0086-13721419972
