Brand:aa
Product detail:
55kw Air cooled water chiller to Thailand plastic industry
It has following aspects:
1. Cooling capacity: 2.85kw~138.2kw for air cooled water chiller
2. Normal conditions: Chilled water inlet temperature is 12 degrees, outlet temperature is 7 degrees. cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees.
3. Input power: 3P-380V-50Hz, Allowable fluctuate voltage: ±10%, allowable voltage difference in phase: ±2%, any special requirements, customized accept.
4. Measuring noise spot: 2m ahead and 1.5m high in front of chiller with average measurement on four dimensions.
5. Hermetic scroll: two sets of 8.3 kw compressor
6. Eight stages volume control or 0%-100% automatic regulation.
7. Fluoride-resistant high-performance motor from French.
8. Dual compressor, two independent sets of refrigeration system. Each other back-up.
9. Use PLC microcomputer control from Germany SIEMENS LCD touch screen, both English and Chinese human-machine interface.
10. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year.
Water Chiller specification:
| Model | Unit | MG-20C(D) |
| Nominal cooling capacity | kcal/h 50HZ/60HZ | 47558 57070 |
| KW 50HZ/60HZ | 55.3 66.36 | |
| Input power | KW | 20.41 |
| Set temp. range | 0ºC~50ºC | |
| Power supply | 3PH-380V-50HZ (200V/220V/415V-50HZ/60HZ) | |
| Refrigerant | Type | R22/R134a/407c |
| Type of control | Thermostatic expansion valve | |
| Compressor | Type | Hermetic scroll |
| Power(kw) | 8.3*2 | |
| Condenser | Type | Finned copper tube+low noise outer rotor fan |
| Cooling air flow(m3/h) | 20000 | |
| Evaporator | type | Tank with coil/shell and tube |
| Chilled fluid flow(m3/h) | 9.52 11.42 | |
| Volume(L) | 350 | |
| Inlet and outlet pipe diameter(inch) | 2" | |
| Pump | Power(kw) | 2.25 |
| Lift(m) | 20 | |
| Dimension | Length(mm) | 2000 |
| Wide(mm) | 1130 | |
| High(mm) | 1720 | |
| Weight | kg | 835 |
| Safety protection | compressor over temperature,over current,high and low pressure,Phase sequence,phase-missing | |
Should you have any questions, that is welcome!
Call me, talk more:
Cell: 86-531-80960818
Address: Jinan,China
Welcome to visit us!
Looking forward distributor from all over the world!















Legal status confirmed








