Cuvettes for chemistry analyzers

Brand:aa

Product detail:

Cuvettes for chemistry analyzers
 

 

customized sizes.

 

 

 

 

Raw Material High Purity Quartz Powder
Surface Good polishing 

 

 

 

Our standard cuvettes as below:

 

External dim H×W×D (mm)	Path length (mm)	Inside width (mm)	Volume(ml)	Product material Number
				ES Quartz Glass	IR Quartz Glass	Optical Glass
45χ12.4χ3.5	1	10	0.35	Q-0101	I-0101	G-0101
45χ12.4χ4.5	2	10	0.70	Q-0102	I-0102	G-0102
45χ12.4χ7.5	5	10	1.7	Q-0103	I-0103	G-0103
45χ12.4χ12.4	10	10	3.5	Q-0104	I-0104	G-0104
45χ12.4χ22.5	20	10	7.0	Q-0105	I-0105	G-0105
45χ12.4χ32.5	30	10	10.5	Q-0106	I-0106	G-0106
45χ12.4χ42.5	40	10	14	Q-0107	I-0107	G-0107
45χ12.4χ52.5	50	10	17.5	Q-0108	I-0108	G-0108
45χ12.4χ102.5	100	10	35.0	Q-0109	I-0109	G-0109

 

 

 

Application: Used in chemical industry, metallurgy, medical, pharmaceutical, food, environmental protection, power plants, water plants, oil and other industries, departments and colleges and universities, and laboratory etc.

Physical Configuration:Standard window and wall thickness.

 

 

Contact to Jingrui, you can find various Laboratory Quartzware :

 

  Quartz Beaker (Low & Tall Form)               Cell, Cylinder

  Test Tube (With or With No Lid)                 Flange Pipe (Flange Ring)

  Crucible (Low & Tall Form)                         Evaporating Dish

  Carrier/ Boat (Flat or Round Bottom)         Distilling Flask

  Ball Joint,Taper & Socket Joint                   Kjeldahl Flask

  Anti-Heat Jacket                                         Volumetric Flask

  Round Dish                                                Boiling Flask                       

 Cuvette                                                      Spiratron (Tubes in Coil)  Stopcocks    

 

Some Typical Characteristics of Quartz:

 

      Very Low Coefficient of Thermal Expansion
      Resistance to High Temperature
      High Chemical Purity
      High Corrosion Resistance
      Extensive Optical Transmission from Ultra-Violet to Infra-Red
      Excellent Electrical Insulation Qualities

 Techincal Information of Transparent Quartz Materials:

 

       Density: 2.203 g/cm3
      Hardness: 7 (Modified Scale); 5.36.5 (Mohs Scale)
      Tensile strength: 48.3 MPa
      Compressive strength: >1.1 GPa
      Bulk modulus: ~37 GPa
      Rigidity modulus: 31 GPa
      Young's modulus: 71.7 GPa
      Poisson's ratio: 0.16
      Coefficient of thermal expansion: 5.5×10-7 cm/(cmK) (average from 20°C to 320°C)
      Thermal conductivity: 1.3 W/(mK)
      Heat capacity: 45.3 J/mol
      Softening point: c. 1730°C
      Annealing point: c. 1180°C
      Strain point: 1075°C
      Electrical resistivity: >1018 Ω×m
      Dielectric constant: 3.75 at 20°C 1 MHz
      Dielectric loss factor: less than 0.0004 at 20°C 1 MHz
      Index of refraction at 587.6 nm (nd): 1.4585

  

   Our factory and equipments as below: