2013 (quality A+) Multi Diag Access J2534 Pass-Thru

Product detail:

Multi-Diag Access J2534 Pass-Thru OBD2 Device
 

Item Description:

Multi-Diag Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.
Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. It supports more than 45 brands, a lot of new vehicles, and a large deepness in diagnostic functions.

Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

1. Maintenance
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter

2. Air Condition
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators

3. Pollution control
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe

4. Liaison to the ground
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)

5. Body
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar

6. Post Equipment
setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system

7. Braking
Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.

8. Motor
Diagnosis of any calculator injection engine (diesel, gasoline, flex fuel, etc.)
Program injector
Electronic configuration of the EGR valve

9. Expert Mode
Diagnosis of advanced computers
Configuration of comfort functions
Change the language of the instrument panel
Physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis

Specifications:

1. Languages
Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.

2. Characters
Compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 ma)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
On-board memory

Please pay attention Multi-Di@g Access J2534 Pass-Thru OBD2 Device is not good at programming function. And it is not good at Japanese cars.

Package including:

1. VCI (Vehicle Communication Interface)
2. DB25 to OBD-2 Male cable
3. OBD2 Male to OBD2 Female cable
4. DIN6 to USB cable
5. DIN6 to DB9F cable

J2534 Multi-diag Technical Support:

1. J2534 Using Note:

During installation, when Multi-Di@g configuration window appears, you should set
Communication interface to USB and set VCI serial number to A070026:

After installation, MultiDiag shows message asking to get activation code:

During the diagnostic with the device connected, warning about 0 days left will appear. Just check
the mark “Do not display this message again” and continue the work, everything will be working
ok.

2. J2534 Car Model List: 

3. Multi-di@g Access J2534 Language Available:

4. FAQ (Frequently Asked Questions):
Q: Do I need password when using this product?
A: Yes. When you install the software, it will give you a code. we will send you activation code. Please be sure to set the VCI to A070026.

Q: Is that necessary to use that COM cable?
A: It is not necessary to use that COM cable; you can directly use USB cable to connect.